Addonics Technologies HDUSI325AES manual Load Default, Link Option, USB Auto-Link, Copy HPA

Load Default

Press ESC to return to the main menu then use the ENT button to select. This function resets all settings to their factory default. This function helps the system recover from errors caused by an illegal operation.

10-07.Adv Setup

Load Default

Press ENT to enter the following screen. Use the Up and Down bu defaults.

Load Default

If Load Default OK, this will be displayed on the LCD as shown below.

Load Default

Ok

Link Option

NOT AVAILABLE

USB Auto-Link

NOT AVAILABLE

Copy HPA

If this function is set to "ON", the system will completely copy the data in a source HDD's host protected area.

10-10. Adv Setup

Copy HPA

The default is "OFF". Use the ENT , Up and Down buttons to change this to "On".