1011Supported operating modes
Incoming display mode (Input timing)
Resolution | Horizontal | Vertical | Pixel | Comment |
| Frequency (KHz) | Frequency (Hz) | Frequency (MHz) |
|
640x350 | 31.47(P) | 70.08(N) | 25.17 | DOS |
720x400 | 31.47(N) | 70.08(P) | 28.32 | DOS |
640x480 | 31.47(N) | 60.00(N) | 25.18 | DOS |
640x480 | 37.86(N) | 72.80(N) | 31.50 | VESA |
640x480 | 37.50(N) | 75.00(N) | 31.50 | VESA |
800x600 | 35.16(P) | 56.25(P) | 36.00 | VESA |
800x600 | 37.88(P) | 60.32(P) | 40.00 | VESA |
800x600 | 48.08(P) | 72.19(P) | 50.00 | VESA |
800x600 | 46.87(P) | 75.00(P) | 49.50 | VESA |
1024x768 | 48.36(N) | 60.00(N) | 65.00 | VESA |
1024x768 | 56.48(N) | 70.10(N) | 75.00 | VESA |
1024x768 | 60.02(P) | 75.00(P) | 78.75 | VESA |
1152x864 | 67.50(P) | 75.00(P) | 108.00 | VESA |
1152x870 | 68.68(N) | 75.06(N) | 100.00 | Macintosh |
1152x900 | 61.80(N) | 66.00(N) | 94.50 | SUN 66 |
1152x900 | 71.81(N) | 76.14(N) | 108.00 | SUN |
1280x1024 | 64.00(P) | 60.00(P) | 108.00 | VESA |
1280x1024 | 75.83(N) | 71.53(N) | 128.00 | IBMI |
1280x1024 | 80.00(P) | 75.00(P) | 135.00 | VESA |
1280x1024 | 81.18(N) | 76.16(N) | 135.09 | SPARC2 |
•Modes not listed in the table may not be supported. For an optimal picture, we recommended you choose a mode listed in the table above.
•There are 22 available modes that are compatible with Windows.
•Image disruption may occur as a result of signal frequency differences from VGA cards which do not correspond with the usual standard. This is not, however, an error. You may improve this situation by altering an automatic setting or by manually changing the phase setting and the pixel frequency from the “Geometry” menu.
•If you switch off the monitor, interference lines can occur on your screen. But do not be concerned about this, as it is normal.
•To extend the service life of the product, we recommend that you use your computer's power management function.
Supported operating modes 30