BenQ LCD Color Monitor User's Guide
Adjusting the Monitor
A Look at the Control Panel
Exit | Enter |
There are 6 keys for user’s control including “iKey”, “Exit”, “Enter”, “<” and “>” key and a power swith.The following descriptions are the introduction of these keys & switch.
1.“Power”: Turn the power on or off.
2.“iKey” : Adjust vertical position, phase, horizontal position and pixel clock automatically.
3.“Exit” key: Back to main menus, save menu or exist OSD menu without saving.
4.“Enter” key: Enter
5.“<”: For Left adjustment. Left key is the hot key for Contrast adjustment.
6.“>”: For Right adjustment. Right key is the hot key for Brightness adjustment.
Hot Key Mode
Contrast hot-key
1.Press “<” key to enter the Contrast hot- key mode.
2.Press “<” or “>” key to make adjust ment. The scale can be adjusted from maximum (100) to minimum (0).
3.Press the “Exit” to leave OSD operation. The adjustment can be
Brightness hot-key
1.Press “>” key to enter the Brightness
2.Press “<” or “>” key to make adjust- ment. The scale can be adjusted from maximum (100) to minimum (0).
3.Press the “Exit” to leave OSD operation. The adjustment can be