4. Troubleshooting
Symptom | Remedy |
|
|
*Blank Screen* |
|
Power indicator is off | • Make sure the power cable is connected properly (see |
| Installation on page 4). |
| • Make sure that the monitor was turned on using the |
| power switch (see To connect the monitor to your PC |
| on page 4). |
Power indicator lights orange | • Perhaps a power saving mode is active? Press any key |
| on your keyboard or move the mouse. |
|
|
Power indicator lights green | • A screen saver may have activated automatically after a |
| certain period of inactivity. Press any key on your key- |
| board or move the mouse. |
|
|
"No Signal Detected!" message | • Is the signal cable connected to the monitor and the |
| PC's graphics port (see Installation on page 4)? |
| • Is the PC turned on (see your PC's documentation)? |
*Display Problems* |
|
Image is displaced to the left/right | • If the image appears normal but |
or to the top/bottom | adjust it using the OSD functions. For further informa- |
| tion, see "Auto Adjust" in the OSD icon list section. |
|
|
Image is blurred | • Check brightness and contrast settings (see "Lumi- |
| nance" in the OSD icon list section). |
| • Check the sharpness setting (see "Sharpness" in the |
| OSD icon list section). |
Color problems | • If the colors are off (e.g., white is not really displayed as |
| white etc.), you should adjust the color temperature |
| (see "Color" in the OSD icon list section). |
Troubleshooting 7