Philips EXP 200 Programming track/title numbers, You can select up to 32 titles and store them

Page 14

FEATURES

English

Programming track/title numbers

	You can select up to 32 titles and store them in the	MODE
	memory in a desired sequence. You can store any	MODE
	memory in a desired sequence. You can store any
	track/titles more than once.
	1 While playback is stopped, select a track/title with	PROGRAM
	4 or ¢.	PROGRAM
	4 or ¢.
	2 Press PROGRAM to store the track/titles.
	y PROGRAM lights up, the track/titles number
	programmed and P with the total number of
	stored track/titles are displayed.

3 Select and store all desired tracks in this way.

CD

PROGRAM

4Press 38 to start playback of your selected track/titles. y PROGRAM is shown and playback starts.

•You can review the program by pressing PROGRAM for more than 2 seconds.

y The display shows all stored track/titles in sequence.

Note: – If you try to store more than 32 track/titles, FULL is displayed.

Erasing the program

1If necessary, press 7 to stop playback.

2Press 7 to erase the program.

y CLr is displayed once, PROGRAM goes off and the program is

erased.

Notes: The program will also be erased if you

CD

PROGRAM

–interrupt the power supply,

–open the CD lid, or

–the set is switched off automatically.

14

Image 14

Contents AudioAudio Tel MexicoMéxico D.F Exportador País de Origen China Nº de Serie5VDC Atención Français GuaranteesEnglish EspañolCONTROLS, refer to the illustration on Locks all buttonsQuick Start Power Supply Only use the AY 3160 mains adapter Connect an audio signal cable not supplied, toLine out Volume and sound adjustment Headphones and Sound OptionsHeadphones HE DBB Dynamic bass boost and Audible beep feedbackDo not touch the lens a of the CD player MP3-CD player and CD handlingEnvironmental information Avoid dropping the set as this may cause damageOnly use the AY 3545 car Voltage converter 4.5 V, DC IN-CAR ConnectionIn-car use connections supplied or optionally available Positive pole to the centerMP3 quick search on MP3-CDs only FeaturesSelecting a track / title and searching CD and MP3 Memory in a desired sequence. You can store any Programming track/title numbersYou can select up to 32 titles and store them Or ¢To deactivate HOLD, switch the slider to OFF You can store the last position played. When restartingSwitch the slider to Resume during playback to Storing the last position played ResumeDamage caused by dropping ActivationSelecting different playing options Mode DBBPlaying a CD Toggle 38 to switch on the set, start playback or pauseCD Play Lid opensPlayback information General Information How to get MP3 musicMP3-CD Playback Supported formatsNumber How to organize the MP3 ﬁlesSet can play up to 400 tracks on one MP3-CD POP, there are no MP3 ﬁles. POP is therefore skippedDAO Disc At Once General information on Writing FormatsThere are 3 formats used to record data on a disc MultisessionMaximum 40, and titles maximum Press 38 to start playback To play MP3-CDsInsert a MP3 CD-ROM with the label side up Press 7 to stop playbackTroubleshooting Symptom Check point TreatmentFirst track Playback doesNot start from Sound qualityAustralia Philips product warranty for Australia onlyMonths free service Conditions of warranty Philips Service Branches Model No Serial NoGuarantee and Service for New Zealand NEW ZealandCertificado DE Garantia Para O Brasil Os dados deste manual estão sujeitos a alteraçõesPoliza DE Garantía Philips Mexicana, S.A. de C.V