xp CDR 600/00_01 English 06-04-2001 18:19 Pagina 22
Playing
Search
English
EASY JOG | STORE/ |
| MENU CANCEL/DELETE |
1Hold down 5 or 6 (in Play mode).
➜The player first searches backwards or forwards at
10 times normal speed with sound at low volume, then goes to 50 times normal speed with sound muted.
2Release the button at the desired passage.
➜Play will start at the desired passage.
Note: During Shuffle, Repeat Track or Programmed play, search is restricted to within the track being played at the time.
Shuffle (random order) play
1Press SHUFFLE before or during CD play to start shuffle play.
➜The tracks on the CD (or program if set) will play in random order.
2Press SHUFFLE again to return to normal CD play.
➜CD recorder goes to Stop mode.
Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1Press repeat one or more times during CD play.
➜When REPEAT TRACK lights up, the current track will play repeatedly. When REPEAT ALL lights up, the entire disc or program plays repeatedly.
2To return to normal play, press REPEAT one or more times until:
➜The REPEAT text disappears from the display.
Note:
You can use shuffle in combination withor programmed play.
REPEAT is also cleared when you open the disc tray.
Programming tracks
0You can program up to 99 tracks to play in any desired sequence.
0Tracks can be programmed more than once, but each time counts as a track (STEP).
Programming
1In Stop mode press PROGRAM to enter Program mode.
➜PROG flashes and PROGRAM followed by track information appears on the display.
2Select the desired track numbers by turning the
EASY JOG/ENTER key left or right and store by pressing
ENTER.
or:
Key in a track number with the number keys and press ENTER to confirm. For
➜The track will be stored in the program.
➜The track number, total program time and the number of programmed tracks (STEPS) are displayed.
3Repeat step 2 for all tracks to be programmed.
4Press STOP 9 or PROGRAM to end programming. ➜ PROG lights continuously.
5Press PLAY/PAUSE 2; to start programmed play.
Note:
To review the program, press PROGRAM, followed by 5 or 6 with the CD recorder in Stop mode.
To add more tracks to the program, repeat steps 1 to 5. If you try to store more than 99 tracks,
PROG FULL will appear on the display.
Clearing a program
1Press STOP 9 if necessary to stop programmed play.
2Press STOP 9 again to clear the program. ➜ PROG will disappear from the display.
0The program is also cleared when you open the disc tray.
Erasing a track from a program
1In Stop mode press PROGRAM to enter Program mode.
2Use 5 or 6 to select the track from to be deleted.
➜The track number and program step will be shown on the display.
3Press CANCEL/DELETE to erase the track from the program.
➜The remaining program steps and the remaining playing time on the program will be displayed.
22