Tripp Lite U224-1R4-R, U224-4R4-R owner manual Installation

7. Installation

Digital	MP3/MP4	Mouse
Camcorder	/Mobile Hard	/Keyboard

Local

Unit

PC
DC Power	Cat5e/6 Cable
	Up to 150 ft. (45m)
(5V, 2.0A)

Printer

Remote

Unit

NOTE: The diagram above shows the U224-1R4-R. The U224-4R4-R will have all 4 USB ports on the Remote Unit.

1.Connect the Local Unit of your Cat5 Extender/Hub to a USB port on your computer (The red Power LED on the U224-1R4-R local unit will light up to indicate the unit is connected to a powered-on computer. The U224-4R4-R does not have a Power LED.)

2.Using Cat5e/6 cable (up to 150 ft. or 45m), connect the Local Unit and the Remote Unit via the RJ45 ports. (The red Link LED will light up on the Remote Unit to indicate it is connected to the Local Unit)

3.Connect the included AC Adapter to the Power Jack located on the U224- 1R4-R Local Unit or the U224-4R4-R Remote Unit. Plug into an available power source.

4.Connect a USB device to any available Local USB port and/or connect a USB device to any available Remote USB port. (The green USB LED will light up to indicate a device is plugged into the corresponding port. The USB LED for the U224-1R4-R Remote USB Port is located between the RJ45 Port and the Power Jack on the Local Unit)