Tripp Lite XL INT specifications DB9 Port Connection -Optional, If you have additional computers

Page 4

1 DB9 Port Connection –Optional–*

Using the grey or tan Tripp Lite cable that came with your UPS, connect your primary server’s DB9 port to the single DB9 port labeled “LAN 4.1” (which provides complete intelligent RS-232 communications).**

*Serial port connections are optional. Your UPS will function properly without these connections.

**The “LAN 4.1” DB9 port is always enabled and is not controlled by the LAN Interface DIP Switches.

2 If you have additional computers:

a.Connect them to the DB9 ports labeled “LAN 2.2” (which provide basic, contact-closure shutdown capabilities) using the black cables that came with your UPS.

b.Set their corresponding LAN Interface DIP Switches to the ACTIVATE (DOWN) position. See diagram for which switch controls which port.***

*** If you do not connect a computer to either of

2a. Back Panel

the “LAN 2.2” DB9 ports, set their

 

corresponding LAN Interface DIP Switches to

 

the DEACTIVATE (UP) position.

 

Note: DIP Switch #3 has no function.

 

DIP Switches #2 & #1

(Lan Interface Switches)

DEACTIVATE

ACTIVATE

2b. Back Panel

3 Load software and run the installation program appropriate for your operating system.

4

Image 4
Contents Quick Installation p Safety Battery WarningsUPS Location Warnings UPS Connection WarningsQuick Installation DB9 Port Connection -Optional If you have additional computersSystem Enable Switch DIP Switch #4 ON/Standby SwitchMute/Test Switch Basic OperationRS-232 Port AC ReceptaclesContact Closure Ports Storage & Service SpecificationsService Wire Color-Code ChartSmartPro INT SmartPro XL INT Seguridad Advertencias sobre la ubicación del UPSConecte al UPS las computadoras y Equipo adicionales Instalación RápidaEncienda el UPS Conexión al puerto DB9 OpcionalAdicionales Cargue el software y ejecute el programa de instalaciónConmutadores Operación BásicaLuces indicadoras Otras características del UPS Receptáculos de CAPuerto RS-232 Puertos de cierre por contactoAlmacenamiento y Servicio EspecificacionesAlmacenamiento ServicioInstallation Rapide p Avertissements liées à l’emplacement de l’UPS SécuritéAvertissements liés aux branchements de l’UPS Avertissements liés aux branchements du matérielInstallation Rapide Chargez le logiciel et exécutez le programme d’installation Connexion au port DB9Facultative Si vous avez d’autresCommutateurs Fonctionnement de BaseVoyants indicateurs Prises d’alimentation Ports de fermeture des contactsEntreposage et Maintenance MaintenanceCaratéristiques Techniques EntreposageSchnelle Installation S Warnhinweise zum Installationsort der USV SicherheitSchnelle Installation Angeschlossen werden OptionalSollen Grundlegender Betrieb LeuchtanzeigenWeitere Funktionen der USV Wechselstrom-SteckbuchsenKontaktschließungsports Externer BatterieanschlussLagerungund Kundendienst Technische DatenLagerung Kundendienst

XL INT specifications

Tripp Lite XL INT is a cutting-edge power management and connectivity solution designed to meet the demands of modern technology environments. Whether for home, office, or industrial use, the XL INT series incorporates advanced features that ensure reliability, efficiency, and safety in power handling and distribution.

One of the cornerstone features of the Tripp Lite XL INT is its robust surge protection. Equipped with advanced surge suppression technology, it defends sensitive electronic devices from power spikes and surges, significantly prolonging the lifespan of connected equipment. This is particularly crucial in areas prone to electrical storms or unstable power sources.

Another notable characteristic is the integrated network monitoring capabilities. The XL INT provides real-time information about power usage, energy consumption, and any anomalies within the electrical system. This feature empowers users to make informed decisions about energy management, contributing to both cost savings and environmental efficiency.

The XL INT series also boasts multiple outlets, including USB ports, allowing users to connect a variety of devices simultaneously. The intelligently designed layout ensures that even large plugs can fit without blocking adjacent sockets, enhancing versatility in use. Compatibility with a wide range of devices—from computers and printers to networking equipment—makes it an ideal choice for both personal and professional settings.

In terms of build quality, Tripp Lite ensures that the XL INT is both rugged and aesthetically pleasing. Its durable construction is resistant to wear and tear, making it ideal for busy workspaces. The sleek design also allows it to blend seamlessly into any environment, whether it be an office desk or a server room.

Safety features are paramount in the design of the XL INT. It includes thermal shutdown technology, which automatically disconnects power in the event of overheating, thus preventing potential hazards. Additionally, the unit complies with various safety standards and certifications, ensuring peace of mind for users.

Overall, Tripp Lite XL INT serves as a reliable and efficient power management solution. Its comprehensive features, robust design, and innovative technologies make it a leader in the power protection and management field. For those looking to enhance their workspace with a dependable and intelligent power solution, the Tripp Lite XL INT stands out as a premier choice.