Tripp Lite XL INT specifications Storage & Service, Specifications, Wire Color-Code Chart

Page 7

External Battery Connector

Use to connect additional Tripp Lite battery packs for additional runtime. Refer to the label next to the connector for the appro- priate Tripp Lite battery pack to connect. Refer to instructions available with the battery pack for complete connection informa- tion and safety warnings.

Storage & Service

Storage

Turn your UPS OFF: first engage the ON/Standby Switch and release it to place your UPS in the “Standby” mode, then move the System Enable Switch to the "DISABLE" (DOWN) position to prevent battery drain, then disconnect the UPS power cord from the wall outlet. If you plan on storing your UPS for an extended period of time, recharge the UPS batteries once every three months. Follow steps #1 and #3 in the Quick Installation section and allow the UPS to charge from 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the 2 year warranty period, enclose a copy of your sales receipt.

Specifications

 

Smart INT 2200

Smart INT 3000

Output Capacity (VA/Watts):

2200/1700

3000/2400

Battery Runtime (Half Load/

 

 

Full Load) Minutes:

27+/11+*

23+/7+*

Battery Recharge Time:

2-4 hrs.

2-4 hrs.

Approvals:

UL, CE

UL, CE

* Battery Runtime for this model can be increased with the addition of optional external battery packs.

Input Voltage (230V); Input Frequency (50/60 Hz, Auto-Selecting); On-Line Input Voltage Range (166-276 volts); Voltage-Regulated Output Voltage Range (230V +8%/-15%); On-Battery Output Voltage Range (230V ± 5%); Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC TVSS Protection Modes (H to N, H to G, N to G).

Wire Color-Code Chart

Wire Color

Wire 1

Wire 2

Wire 3

 

 

American

Black

White

Green

Black

Brown

European

Brown

Blue

Green/Yellow

White

Blue

Wire Reference

Wire 1

Wire 2

Wire 3

AMER

EURO

American

Line 1

Neutral

Ground

 

Green/

European

Line 1

Line 2 or Neutral

Ground

Green

Yellow

 

 

 

 

 

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change.

7

Image 7
Contents Quick Installation p UPS Connection Warnings SafetyBattery Warnings UPS Location WarningsQuick Installation If you have additional computers DB9 Port Connection -OptionalBasic Operation System Enable Switch DIP Switch #4ON/Standby Switch Mute/Test SwitchRS-232 Port AC ReceptaclesContact Closure Ports Wire Color-Code Chart Storage & ServiceSpecifications ServiceSmartPro INT SmartPro XL INT Advertencias sobre la ubicación del UPS SeguridadConecte al UPS las computadoras y Equipo adicionales Instalación RápidaEncienda el UPS Cargue el software y ejecute el programa de instalación Conexión al puerto DB9Opcional AdicionalesConmutadores Operación BásicaLuces indicadoras Puertos de cierre por contacto Otras características del UPSReceptáculos de CA Puerto RS-232Servicio Almacenamiento y ServicioEspecificaciones AlmacenamientoInstallation Rapide p Avertissements liés aux branchements du matériel Avertissements liées à l’emplacement de l’UPSSécurité Avertissements liés aux branchements de l’UPSInstallation Rapide Si vous avez d’autres Chargez le logiciel et exécutez le programme d’installationConnexion au port DB9 FacultativeCommutateurs Fonctionnement de BaseVoyants indicateurs Ports de fermeture des contacts Prises d’alimentationEntreposage Entreposage et MaintenanceMaintenance Caratéristiques TechniquesSchnelle Installation S Sicherheit Warnhinweise zum Installationsort der USVSchnelle Installation Angeschlossen werden OptionalSollen Leuchtanzeigen Grundlegender BetriebExterner Batterieanschluss Weitere Funktionen der USVWechselstrom-Steckbuchsen KontaktschließungsportsKundendienst Lagerungund KundendienstTechnische Daten Lagerung

XL INT specifications

Tripp Lite XL INT is a cutting-edge power management and connectivity solution designed to meet the demands of modern technology environments. Whether for home, office, or industrial use, the XL INT series incorporates advanced features that ensure reliability, efficiency, and safety in power handling and distribution.

One of the cornerstone features of the Tripp Lite XL INT is its robust surge protection. Equipped with advanced surge suppression technology, it defends sensitive electronic devices from power spikes and surges, significantly prolonging the lifespan of connected equipment. This is particularly crucial in areas prone to electrical storms or unstable power sources.

Another notable characteristic is the integrated network monitoring capabilities. The XL INT provides real-time information about power usage, energy consumption, and any anomalies within the electrical system. This feature empowers users to make informed decisions about energy management, contributing to both cost savings and environmental efficiency.

The XL INT series also boasts multiple outlets, including USB ports, allowing users to connect a variety of devices simultaneously. The intelligently designed layout ensures that even large plugs can fit without blocking adjacent sockets, enhancing versatility in use. Compatibility with a wide range of devices—from computers and printers to networking equipment—makes it an ideal choice for both personal and professional settings.

In terms of build quality, Tripp Lite ensures that the XL INT is both rugged and aesthetically pleasing. Its durable construction is resistant to wear and tear, making it ideal for busy workspaces. The sleek design also allows it to blend seamlessly into any environment, whether it be an office desk or a server room.

Safety features are paramount in the design of the XL INT. It includes thermal shutdown technology, which automatically disconnects power in the event of overheating, thus preventing potential hazards. Additionally, the unit complies with various safety standards and certifications, ensuring peace of mind for users.

Overall, Tripp Lite XL INT serves as a reliable and efficient power management solution. Its comprehensive features, robust design, and innovative technologies make it a leader in the power protection and management field. For those looking to enhance their workspace with a dependable and intelligent power solution, the Tripp Lite XL INT stands out as a premier choice.