Tripp Lite B051-000 owner manual DIT Creation

AP Operation

DIT Creation

The LDAP Data Interchange Format (LDIF) is used to represent LDAP entries in a simple text format (please refer to RFC 2849). The figure below illustrates an LDIF file that creates the DIT for the B051- 000 directory tree (shown in the figure, above).

The following figure illustrates an LDIF file that defines the OpenLDAP group for the B051-000.

Using the New Schema

To use the new schema, do the following:

1.Save the new schema file (e.g., B051-000.schema) in the / OpenLDAP/ schema/ directory.

2.Add the new schema to the slapd.conf file, as shown in the figure, below:

3.Restart the LDAP server.

4.Write the LDIF file and create the database entries in init.ldif with the ldapadd command, as shown in the following example:

ldapadd -f init.ldif -x -D “cn=Manager,dc=trip plite,dc=com” -w secret

57