Tripp Lite BC600SINE owner manual Quick Installation, Select UPS Operating Mode

Page 3

Quick Installation

Note: UPS system will function properly upon initial startup; however, maximum runtime for the unit’s battery will only be accessible after it has been charged for 24 hours.

1Connect the UPS to an electrical outlet.

2Plug a computer, monitor and/or other equipment into the UPS system.

The UPS is designed to support only computer equipment. Connecting high power draw equipment such as household appliances or laser printers to outlets providing UPS battery backup will overload the UPS. Special outlets (clearly labeled on the rear panel) provide surge-only (not battery backup) protection designed for laser printers and other high power draw equipment.

“UPS/Surge” receptacles are used to provide connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. They also protect equipment against damaging surges and line noise. Connect the computer and monitor to the “UPS/Surge” receptacles.

1

2

3Select UPS Operating Mode.

Press the ON/OFF button to toggle the UPS between the ON (“ ” LED lit) and the OFF (“ ” LED not lit) modes.

If the LINE POWER indicator light does not

illuminate when the UPS is turned ON, try the following:

3

1.Make sure that the UPS is plugged into a live AC outlet.

2.If your UPS has a sliding ON/OFF switch, place it back in the OFF position, wait several seconds, then place it in the ON position again.

3.If your UPS has an ON/OFF button, you must press it for at least one second to start the UPS. (A beep should sound when the UPS starts.)

4.If the UPS still does not start, contact Tripp Lite Tech Support for assistance.

3

201011083.indb 3

1/6/2011 9:00:09 AM

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Sine Wave Tower UPS System Important Safety Instructions Select UPS Operating Mode Quick InstallationButtons Quick Installation optionalBasic Operation USB CommunicationsMUTE/TEST Button Indicator LightsOther UPS Features Storage & Service ServiceStorage FCC Notice, Class B Warranty RegistrationManual de operación No agregue baterías externas Importantes instrucciones de seguridadSelección del modo de Operación del UPS Instalación rápidaBotones Instalación rápida optativoOperación básica Comunicaciones USBLuces indicadoras Operación básica continuaciónOtras prestaciones del UPS Una pérdida permanente de capacidad Almacenamiento y servicioAlmacenamiento ServicioCumplimiento de las normas de los números de identificación GarantíaGuide de lutilisateur Nessayez pas dajouter de batteries externes Importantes consignes de sécuritéInstallation rapide Choix du mode dexploitation du système UPSVotre système dalimentation continue sans Commutateurs Installation rapide facultativeExploitation de base Communications USBExploitation de base suite Voyants lumineuxEnviron 2 secondes puis relâchez-le Autres fonctions Entreposage et entretien EntreposageEntretien Numéros didentification de conformité aux règlements Garantie

BC600SINE specifications

The Tripp Lite BC600SINE is a compact and powerful battery backup system designed to provide dependable power protection for a variety of electronic devices. It is particularly well-suited for home and small office environments, where uninterrupted power supply is essential. With its advanced technologies and robust features, the BC600SINE stands out as an ideal solution for protecting sensitive equipment from power disturbances.

One of the main features of the BC600SINE is its pure sine wave output, which is critical for maintaining the performance and lifespan of connected devices. Unlike modified sine wave inverters, the pure sine wave technology delivers clean and stable power, mimicking the electrical characteristics of grid power. This makes the BC600SINE perfect for a wide range of electronics, including computers, printers, networking equipment, and gaming consoles.

With a capacity of 600VA and an output power of 360W, the BC600SINE can handle multiple devices simultaneously. Its compact design allows for easy placement in tight spaces without sacrificing performance. The unit is equipped with multiple outlets, providing several options for connecting devices. The battery backup functionality ensures that equipment remains operational during power outages, safeguarding data and preventing downtime.

The BC600SINE is built with a user-friendly LCD interface that displays essential information such as battery status, load levels, and input/output voltage. This feature allows users to monitor the performance of the unit in real-time, ensuring they are always informed about power conditions. Additionally, the unit offers surge protection to shield devices from voltage spikes and surges, which can occur during outages or storms.

Another notable characteristic of the Tripp Lite BC600SINE is its energy efficiency. The unit is designed to consume minimal power while in operation, helping users save on electricity bills. Its smart battery management system extends battery life by optimizing charging cycles and maintaining optimal battery health.

Overall, the Tripp Lite BC600SINE is a reliable and efficient power backup solution. Its pure sine wave output, user-friendly interface, and surge protection make it an ideal choice for those who prioritize equipment safety and operational continuity. Whether for critical work-from-home setups or sensitive electronic devices, the BC600SINE delivers the peace of mind that comes with knowing your power needs are met.
Top Page Image Contents