Tripp Lite BC600SINE owner manual Indicator Lights, MUTE/TEST Button

Page 5

Basic Operation continued

MUTE/TEST Button:

Silence the UPS On-Battery Alarm: Press and hold this button to silence the UPS on-battery alarm, a series of short beeps followed by a brief pause that is activated when the UPS is providing AC power from battery. Note: When the battery is nearly depleted, the low battery alarm—a continuous beep that cannot be silenced— will warn to shut down connected equipment immediately.

Run a Self-Test: To run a self-test, leave connected equipment on.

With the UPS plugged in and ON, press and hold the button until the UPS beeps (about 2 seconds) then release it.

Self-Test Results: All LEDs will be lit and the UPS will emit several short beeps as it momentarily switches to battery to test charge and load capacity. The test will last up to 10 seconds. If the inverter is overloaded, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, remove some of the load from the “UPS/Surge” outlets and run the self-test again. If the batteries are weak, the “” LED will stay lit and the UPS will continue to beep after the test. If this happens, let the UPS charge its batteries for 12 hours and repeat the test. If the condition persists, contact Tripp Lite for service. CAUTION: Do not unplug the UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into network connections.

Indicator Lights

All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and

turned on.

LINE POWER: This green light will illuminate whenever the UPS is ON and receiving normal AC line power.

BATTERY POWER: This yellow light will illuminate when the UPS is providing equipment with battery power.

REPLACE BATTERY: This red light will illuminate continuously after the UPS runs a self-test to indicate that the battery is weak. If it remains lit after allowing the UPS to charge for twelve hours and running a second self-test, contact Tripp Lite for service.

OVERLOAD: This red light will illuminate continuously to indicate that the UPS is overloaded when the UPS is providing power from battery or after the UPS runs a self-test. If it lights up, immediately remove some of the equipment connected to the “UPS/Surge” outlets and run a self- test. Large overloads may cause the UPS to shut down.

5

201011083.indb 5

1/6/2011 9:00:16 AM

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Sine Wave Tower UPS System Important Safety Instructions Select UPS Operating Mode Quick InstallationBasic Operation Quick Installation optionalUSB Communications ButtonsMUTE/TEST Button Indicator LightsOther UPS Features Storage Storage & ServiceService FCC Notice, Class B Warranty RegistrationManual de operación No agregue baterías externas Importantes instrucciones de seguridadSelección del modo de Operación del UPS Instalación rápidaOperación básica Instalación rápida optativoComunicaciones USB BotonesLuces indicadoras Operación básica continuaciónOtras prestaciones del UPS Almacenamiento Almacenamiento y servicioServicio Una pérdida permanente de capacidadCumplimiento de las normas de los números de identificación GarantíaGuide de lutilisateur Nessayez pas dajouter de batteries externes Importantes consignes de sécuritéVotre système dalimentation continue sans Installation rapideChoix du mode dexploitation du système UPS Exploitation de base Installation rapide facultativeCommunications USB CommutateursEnviron 2 secondes puis relâchez-le Exploitation de base suiteVoyants lumineux Autres fonctions Entretien Entreposage et entretienEntreposage Numéros didentification de conformité aux règlements Garantie

BC600SINE specifications

The Tripp Lite BC600SINE is a compact and powerful battery backup system designed to provide dependable power protection for a variety of electronic devices. It is particularly well-suited for home and small office environments, where uninterrupted power supply is essential. With its advanced technologies and robust features, the BC600SINE stands out as an ideal solution for protecting sensitive equipment from power disturbances.

One of the main features of the BC600SINE is its pure sine wave output, which is critical for maintaining the performance and lifespan of connected devices. Unlike modified sine wave inverters, the pure sine wave technology delivers clean and stable power, mimicking the electrical characteristics of grid power. This makes the BC600SINE perfect for a wide range of electronics, including computers, printers, networking equipment, and gaming consoles.

With a capacity of 600VA and an output power of 360W, the BC600SINE can handle multiple devices simultaneously. Its compact design allows for easy placement in tight spaces without sacrificing performance. The unit is equipped with multiple outlets, providing several options for connecting devices. The battery backup functionality ensures that equipment remains operational during power outages, safeguarding data and preventing downtime.

The BC600SINE is built with a user-friendly LCD interface that displays essential information such as battery status, load levels, and input/output voltage. This feature allows users to monitor the performance of the unit in real-time, ensuring they are always informed about power conditions. Additionally, the unit offers surge protection to shield devices from voltage spikes and surges, which can occur during outages or storms.

Another notable characteristic of the Tripp Lite BC600SINE is its energy efficiency. The unit is designed to consume minimal power while in operation, helping users save on electricity bills. Its smart battery management system extends battery life by optimizing charging cycles and maintaining optimal battery health.

Overall, the Tripp Lite BC600SINE is a reliable and efficient power backup solution. Its pure sine wave output, user-friendly interface, and surge protection make it an ideal choice for those who prioritize equipment safety and operational continuity. Whether for critical work-from-home setups or sensitive electronic devices, the BC600SINE delivers the peace of mind that comes with knowing your power needs are met.
Top Page Image Contents