Recommended Electrical Service
Maximum input amps / watts
BATTERY
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity - DC requirements increase during
DC INPUT: Full continuous load125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A max
Expandable battery runtime
DC system voltage
Battery recharge rate
Runtime is expandable with any number of
12V
Selectable 7.5 / 30 amp
LEDS ALARMS & SWITCHES
Front panel LEDs
Switches
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences
SURGE / NOISE SUPPRESSION
AC surge | |
suppression |
|
|
|
PHYSICAL |
|
Shipping weight (lbs) | 26 |
|
|
Shipping weight (kg) | 11.8 |
|
|
Shipping | 12.5 x 11 x 10.75 |
Dimensions (HWD/in) |
|
|
|
Shipping | 31.8 x 27.9 x 27.3 |
Dimensions |
|
(HWD/cm) |
|
|
|
Unit weight (lbs) | 24 |
|
|
Unit weight (kg) | 10.9 |
|
|
Unit Dimensions | 7 x 8.75 x 9 |
(HWD/in) |
|
|
|
Unit Dimensions | 17.8 x 22.2 x 22.8 |
(HWD/cm) |
|
|
|
Material of | Polycarbonate |
construction |
|
|
|
Form factors | Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional |
supported | mounting information) |
|
|
Cooling method | |
|
|
Style | |
|
|
ENVIRONMENTAL |
|
Relative Humidity | |
|
|
LINE / BATTERY TRANSFER | |
Transfer time from | 10 milliseconds (typicalcompatible with many computers, servers and networking equipment - verify transfer time |
line power to battery | compatibility of loads for UPS applications) |
mode |
|
|
|
Low voltage transfer | In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, |
to battery power | 182, 201Vsee manual) |
|
|
High voltage transfer | In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272 |
to battery power |
|
|
|
SPECIAL FEATURES |
|
Appearance | |
|
|