Quick Installation optional

These connections are optional. Your UPS will function properly without these connections.

Basic Operation

Buttons

1USB Communications

Use any USB cable to connect the USB port of your computer to the USB port of your UPS. Download the PowerAlert UPS monitoring soft- ware program appropriate for your operating system from www.tripplite.com and install it on your computer.

2Serial Communications

(Select Models Only)

Use the serial cable provided with your UPS to connect the DB9 port of your computer to the DB9 port of your UPS. Download the PowerAlert UPS monitoring software program appropriate for your operating system from www.tripplite.com and install it on your computer.

3External Battery Connection

(Select Models Only)

External batteries are only needed to extend runtime. Adding external batteries will increase recharge time as well as runtime.

The illustration shows the location of your UPS’s External Battery Connector, where you will insert the battery pack cable. Complete installation and mounting instructions for your battery pack appear in the battery pack’s owner’s manual. Make sure that cables are fully inserted into their connectors. Small sparks may result during battery connection; this is normal.

If you connect more than one external battery, set the Charge Level switch to EXTERNAL BATTERY. Your UPS’s charger will increase its output to handle the additional batteries.

Use the ON/OFF button to do three things:

Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the ON/OFF button and hold it until you hear a beep (about 2 seconds) to toggle between the following operating modes. Choose your UPS’s operating mode based on the regional guidelines in Step 3 of the Quick Installation section.

•UPS Mode: ENABLES battery backup. UPS Conditions: The UPS charges its battery and supplies power at its receptacles when it is receiving utility line power. If utility power fails, the UPS provides power from its batteries. The “” indicator light is lit. Setting Advantages: Provides battery backup during blackouts or brownouts.

•CHARGE ONLY Mode: DISABLES battery backup. UPS

Conditions: The UPS charges its battery and supplies power at its receptacles when it is receiving utility line power. The “” indicator light is flashing. Setting Advantages: Continues to charge the battery when power is present while turning OFF the inverter to prevent battery depletion during power outages when equipment is not in use.

Cold-Start Your UPS: You may “cold start” your UPS and use it as a stand-alone power source when utility power is not present, providing that the UPS battery is charged. To “cold start” your UPS, press and hold the ON/OFF button until you hear a beep (about 2 seconds), then release it. The “ ” indicator light will illuminate and AC power inverted from stored battery power will be provided at its receptacles.

Shut Down Your UPS: Press and hold the ON/OFF button when AC line power is absent (i.e. during a blackout, or when the UPS is unplugged) to deactivate your UPS.

Use the MUTE/TEST button to do two things:

Silence the UPS On-Battery Alarm: Press and hold this button to silence the UPS On-Battery alarm, a series of short beeps followed by a brief pause that is activated when the UPS is providing AC power from battery. Note: When the battery is nearly depleted, the Low Battery alarm—a continuous beep that cannot be silenced—will alert you to immediately shut down connected equipment.

Run a Self-Test: Your UPS performs a self-test whenever it is first plugged in. To have it run a self-test at another time, leave your connected equipment on. With your UPS plugged in and in the UPS mode, press and hold this button until you hear a beep (about 2 sec- onds) then release it.

Results of a Self-Test: All the LEDs will be lit and the UPS will emit several short beeps as it momentarily switches to battery to test its charge and load capacity. The test will last at most 10 seconds. If the inverter is overloaded, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, remove some of the load

SMART1050XL, SMART1500XL, AGSM1050PJR3, AGSM1500XPSR3 specifications

The Tripp Lite SMART1500XL is a reliable and efficient Uninterruptible Power Supply (UPS) system designed to protect critical electronic devices in both home and office environments. With its robust features and advanced technologies, the SMART1500XL ensures that users are safeguarded against unexpected power outages, surges, and fluctuations.

One of the standout features of the SMART1500XL is its 1500VA/900W rating, which provides ample power to support multiple devices, including computers, networking equipment, and other sensitive electronics. This UPS model includes 8 outlets, with four featuring a battery backup and surge protection, while the other four provide surge-only outlets. This configuration allows users to prioritize essential equipment while also protecting non-critical devices.

The SMART1500XL employs Automatic Voltage Regulation (AVR) technology, which helps stabilize the output voltage without resorting to battery use. This feature is particularly beneficial for areas with frequent voltage fluctuations, as it extends the battery life and ensures consistent performance. Additionally, the UPS is equipped with a built-in LCD display that provides real-time status updates including remaining battery runtime, load level, and input voltage, giving users valuable insight into the power environment.

Another notable characteristic of the SMART1500XL is its compatibility with Tripp Lite's PowerAlert software. This software offers advanced monitoring and management capabilities, allowing users to configure settings, receive notifications, and perform graceful shutdowns of connected devices. The UPS also supports USB and serial communication, making integration with various operating systems and hardware straightforward.

In terms of physical design, the SMART1500XL is rack-mountable, allowing for versatile installation in server rooms or workstations. The form factor helps optimize space while ensuring that critical components remain protected. Built with durable materials and designed for heat dissipation, this UPS promises longevity and reliability.

In summary, the Tripp Lite SMART1500XL offers a comprehensive power protection solution with its strong power rating, AVR technology, user-friendly interface, and monitoring capabilities. It is an ideal choice for any user looking to safeguard their essential electronic equipment against power disturbances while ensuring operational continuity.