Storage, Service | Tripp Lite AGSM1050PJR3, AGSM1500XPSR3 manual

Storage & Service

Storage

All connected equipment should be turned off, then disconnected from the UPS to avoid battery drain. Unplug your UPS from its AC receptacle, then press and hold its ON/OFF button to deactivate it. Your UPS is now ready for storage. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charge for 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the warranty period, enclose a copy of your sales receipt.

Specifications

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Model:	SMART700	SMART750XL	SMART1050
Series:	AGSM1050PJR3	AGSM1500XPSR3	AGSM1050PJR3
Input Voltage/Frequency:	120V/60 Hz	120V/60 Hz	120V/60 Hz
Output Capacity (VA/Watts):	700/600	750/600	1050/800
Battery Runtime
(Half Load/Full Load) Minutes:	20/6	42/18*	23/8
Battery Recharge Time:	2-4 hrs.	2-4 hrs.*	2-4 hrs.
Approvals:	UL, cUL, NOM, FCC B	UL, cUL, NOM, FCC A	UL, cUL, NOM, FCC B

Model:	SMART1050XL	SMART1500	SMART1500XL
Series:	AGSM1500XPSR3	AGSM1500XPSR3	AGSM1500XPSR3
Input Voltage/Frequency:	120V/60 Hz	120V/60 Hz	120V/60 Hz
Output Capacity (VA/Watts):	1050/800	1500/980	1500/980
Battery Runtime
(Half Load/Full Load) Minutes:	26/6*	20/7	20/7*
Battery Recharge Time:	2-4 hrs.*	2-4 hrs.	2-4 hrs.*
Approvals:	UL, cUL, NOM, FCC A	UL, cUL, NOM, FCC A	UL, cUL, NOM, FCC A

*External battery packs can be connected to these models. External battery packs will increase both the battery runtime and the battery recharge time.

ALL UNITS:

Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB at 1MHz); AC Protection Modes (H to N, H to G, N to G); Tripp Lite External Battery Model (BP36V27).

FCC CLASS A RADIO/TV INTERFERENCE NOTICE:

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a com- mercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC CLASS B RADIO/TV INTERFERENCE NOTICE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference using one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment into an outlet on a circuit different from that which the receiver is connected; consult the dealer or an expe- rienced radio/television technician for help. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SMART1050XL, SMART1500XL, AGSM1050PJR3, AGSM1500XPSR3 specifications

The Tripp Lite SMART1500XL is a reliable and efficient Uninterruptible Power Supply (UPS) system designed to protect critical electronic devices in both home and office environments. With its robust features and advanced technologies, the SMART1500XL ensures that users are safeguarded against unexpected power outages, surges, and fluctuations.

One of the standout features of the SMART1500XL is its 1500VA/900W rating, which provides ample power to support multiple devices, including computers, networking equipment, and other sensitive electronics. This UPS model includes 8 outlets, with four featuring a battery backup and surge protection, while the other four provide surge-only outlets. This configuration allows users to prioritize essential equipment while also protecting non-critical devices.

The SMART1500XL employs Automatic Voltage Regulation (AVR) technology, which helps stabilize the output voltage without resorting to battery use. This feature is particularly beneficial for areas with frequent voltage fluctuations, as it extends the battery life and ensures consistent performance. Additionally, the UPS is equipped with a built-in LCD display that provides real-time status updates including remaining battery runtime, load level, and input voltage, giving users valuable insight into the power environment.

Another notable characteristic of the SMART1500XL is its compatibility with Tripp Lite's PowerAlert software. This software offers advanced monitoring and management capabilities, allowing users to configure settings, receive notifications, and perform graceful shutdowns of connected devices. The UPS also supports USB and serial communication, making integration with various operating systems and hardware straightforward.

In terms of physical design, the SMART1500XL is rack-mountable, allowing for versatile installation in server rooms or workstations. The form factor helps optimize space while ensuring that critical components remain protected. Built with durable materials and designed for heat dissipation, this UPS promises longevity and reliability.

In summary, the Tripp Lite SMART1500XL offers a comprehensive power protection solution with its strong power rating, AVR technology, user-friendly interface, and monitoring capabilities. It is an ideal choice for any user looking to safeguard their essential electronic equipment against power disturbances while ensuring operational continuity.