Output frequency regulation
Outlet quantity / type
Customized load management receptacles
Frequency is regulated to 50/60Hz
7 outlets total (6
Two individually controllable load banks (each bank consists of 3
Overload | |
protection | breakers |
|
|
INPUT |
|
Maximum input | 24A (120v) |
amps |
|
|
|
Input connection | |
type |
|
|
|
Input cord length | 10 ft / 3m |
|
|
Recommended | 100/110/115/120/127V 30A |
Electrical Service |
|
|
|
BATTERY |
|
Full load runtime | 6 minutes (2500w) |
|
|
Half load runtime | 15 minutes (1250w) |
|
|
Expandable | Runtime is expandable with optional |
battery runtime | packs |
|
|
DC system voltage | 72VDC |
|
|
Battery recharge | 6.8 hours to 90% |
rate |
|
|
|
Replacement | |
Battery Cartridge |
|
|
|
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Brownout correction
In double conversion mode, output is regulated within 2% of selected nominal voltage. In economy mode, output is regulated within
Corrects overvoltages to 144V
Corrects undervoltages to 80V (70V at less than 70% load)
LEDS ALARMS & SWITCHES
Front panel LEDs
LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LCD display panel easily rotates for viewing in rackmount or tower configurations.
Alarms
Switches
Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds
SURGE / NOISE SUPPRESSION
AC surge suppression
AC suppression response time
EMI / RFI AC noise suppression
PHYSICAL
504joules
Instantaneous
Yes