Tripp Lite SU10K owner manual Safety, UPS Location Warnings

Page 2

Safety

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite SmartOnline UPS Systems.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

•Install your UPS in a structurally sound area. Your UPS is extremely heavy; take care when moving and lifting the unit.

•Only operate your UPS at indoor temperatures between 32° F and 104° F (between 0° C and 40° C). For best results, keep indoor temperatures between 62° F and 84° F (between 17° C and 29° C).

•Leave adequate space around all sides of the UPS for proper ventilation: 12 in. (30 cm.) clearance at the rear; 4 in. (10 cm.) at sides and on top.

•Do not install the UPS near magnetic storage media, as this may result in data corruption.

UPS Connection Warnings

•The power supply for this unit must be single phase rated in accordance with the equipment nameplate. It also must be suitably grounded.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems in life support applications in which a mal- function or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life support device.

•Connect your UPS's Grounding Terminal to a grounding electrode conductor.

•The SU6K contains its own energy source (battery). The output terminals may be live even when the UPS is not connected to an AC supply.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user-serviceable parts inside.

•Because the batteries present a risk of electrical shock and burn from high short- circuit current, batteries should be changed only by trained service personnel observing proper precautions. Replace the existing batteries with the same number and type of new batteries [(Sealed Lead-Acid) SU6K (twenty 12V/7AH batteries); SU10K (forty 12V/7AH batteries)]. Do not open the batteries. Do not short or bridge the battery terminals with any object.

•The UPS batteries are recyclable. Refer to local codes for disposal requirements, or if in the USA call 1-800-SAV-LEAD (1-800-728-5323) for complete recycling information. Do not dispose of the batteries in a fire.

•Connect only Tripp Lite battery packs to your UPS’s external battery connectors.

•Do not operate your UPS without batteries.

•Fuses should be replaced only by factory authorized personnel. Blown fuses should be replaced only with fuses of the same number and type.

•Potentially lethal voltages exist within this unit as long as the battery supply is connected. Service and repair should be done only by trained personnel. During any service work, the UPS should be turned off or put into manual bypass (see pg. 12).

•During “hot-swap” battery replacement (when the UPS is on manual bypass and connected equipment is turned ON) your UPS will be unable to provide battery backup in the event of a blackout.

•Do not connect or disconnect the battery cabinets while the UPS is operating from the battery supply or when the unit is not in bypass mode.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SmartOnlineTM Safety UPS Location WarningsControl Panels Front PanelSubp Rear PanelsSU10KBP SU10KPM Rear Panels Installation Inverter Operation DIP Switch Settings SU10KPM ShownUPS Location Wiring SelectionWiring Connections Input and Output ConnectionReplacement External Battery Pack ConnectionBattery Fuse SUBPSU10KBPSU10KPMOperation Normal Conditions Battery Condition VerificationInitial Battery Charging Optional Turning the UPS onSELF-TESTING Operation on BYPASS-VOLTAGE OUT of Range LCD Display Select SwitchOperation Special Conditions Operation on OverloadSwitching UPS to Bypass Mode Battery Charge WarningsOperation of Manual Bypass Switch Switching UPS to Normal ModeAS-400 Interface CommunicationsRS-232 Interface AS-400 Interface TableDRY Contact Interface Table Remote Emergency Power OFFDRY Contact Interface Service Warranty & InsuranceFunction Block Diagram Specifications SU6K SU10K

SU10K specifications

The Tripp Lite SU10K is a powerful and reliable uninterruptible power supply (UPS) designed to protect critical equipment and ensure seamless operation during power interruptions. With a robust output of 10,000 VA, this UPS caters to various applications, from data centers to IT infrastructure, making it a versatile solution for businesses of all sizes.

One of the standout features of the SU10K is its line-interactive topology. This technology allows the UPS to correct voltage fluctuations without switching to battery mode, thereby extending battery life and providing a stable power supply to connected devices. This is particularly beneficial for equipment that is sensitive to power quality, such as servers, networking gear, and telecommunications systems.

The SU10K is equipped with a reliable battery system that ensures a continuous power supply during outages. Its hot-swappable batteries make maintenance convenient, allowing users to replace batteries without powering down connected equipment. This feature minimizes downtime, ensuring that critical systems remain operational at all times.

The unit offers a wide range of output options, allowing users to configure the UPS according to their specific needs. With multiple output receptacles, including both NEMA and IEC connectors, the SU10K can accommodate various devices, ensuring flexibility in the setup. The UPS also supports advanced power management features, including SNMP, allowing for remote management and monitoring through network integration. This capability enables IT administrators to keep a close eye on power usage and battery health and receive alerts about potential issues.

In addition to its technical features, the Tripp Lite SU10K boasts a compact design that enables easy installation in various environments. The unit is rack-mountable, making it suitable for traditional server racks or cabinet installations. Its design also incorporates advanced cooling technology, ensuring efficient heat dissipation during operation to enhance performance and extend equipment lifespan.

Furthermore, the SU10K's LCD display provides users with real-time information regarding power status, battery condition, and load capacity, facilitating quick assessments and decision-making. Overall, the Tripp Lite SU10K combines robust technology with user-friendly features, making it an excellent choice for safeguarding critical equipment and ensuring business continuity in the face of power challenges.
Top Page Image Contents