Tripp Lite External Battery Pack Connection, SUBPSU10KBPSU10KPM, Battery Fuse, Replacement

Page 8
fu se

EXTERNAL BATTERY PACK CONNECTION

(SU6K: Optional; SU10K: Required)

Since SU6K models contain internal batteries, connecting external battery packs (to extend runtime) is optional. SU10KPM models, however, do not have internal batteries and require an external battery pack connection to a SU10KBP or a SUBP. Using the supplied battery connection cable, insert one end into the External Battery Connector on the rear panel of your UPS and the other end into the Battery Output Connector on the rear panel of the external battery pack. Use the plug on either end of the supplied cable, but make sure that it is fully inserted into the connector. See figure below for daisy-chaining one or more external battery packs to your UPS.

ON LINE

MODE

ECONOMY

MODE

SUBPSU10KBPSU10KPM

Note: Optional Tripp Lite external battery packs (SUBP's) feature individual 120V AC input line cords and individual internal battery chargers. By adding multiple SUBP's individually connected to 120V AC input, the recharge time of a battery system will be dramatically reduced as compared to systems relying on only the UPS's main charger. While adding SUBP's without connecting their chargers will increase a battery system's reserve capacity, this will also

increase the system's overall

 

20P CS

 

D C INP U T

recharge time. See the figure to the

C HA R G E R

12V /7A h

 

 

 

 

A C INP U T

 

fu se

240V D C

right for the schematic diagram of

 

G

120V D C

 

 

the SUBP external battery pack.

FU S E

 

fu se

 

 

 

 

 

BATTERY FUSE

 

20P CS

fu se

D C O U TP U T

 

 

 

12V /7A h

240V D C

 

 

 

G

REPLACEMENT

 

 

 

THE DIAGRAM OF THE EXTENSIBLE BATTERY CABINET

 

 

 

 

 

 

If one of your fuses has blown, you will notice no output voltage at zero load. Blown

fuses should be replaced as shown in the diagram on the right. Since SU6K models

contain internal batteries, the battery fuse

holders are located on the rear panel of the UPS. Since SU10K models operate solely

from external batteries, the battery

fuse holders are located on the rear panel of the external battery pack(s). Note: SU6K models also support connections to optional external battery packs, which may require battery fuse replacement.

8

Image 8
Contents SmartOnlineTM Safety UPS Location WarningsControl Panels Front PanelSubp Rear PanelsSU10KBP SU10KPM Rear Panels Installation Inverter Operation DIP Switch Settings SU10KPM ShownWiring Selection Wiring ConnectionsUPS Location Input and Output ConnectionExternal Battery Pack Connection Battery FuseReplacement SUBPSU10KBPSU10KPMBattery Condition Verification Initial Battery Charging OptionalOperation Normal Conditions Turning the UPS onSELF-TESTING LCD Display Select Switch Operation Special ConditionsOperation on BYPASS-VOLTAGE OUT of Range Operation on OverloadBattery Charge Warnings Operation of Manual Bypass SwitchSwitching UPS to Bypass Mode Switching UPS to Normal ModeCommunications RS-232 InterfaceAS-400 Interface AS-400 Interface TableDRY Contact Interface Table Remote Emergency Power OFFDRY Contact Interface Service Warranty & InsuranceFunction Block Diagram Specifications SU6K SU10K

SU10K specifications

The Tripp Lite SU10K is a powerful and reliable uninterruptible power supply (UPS) designed to protect critical equipment and ensure seamless operation during power interruptions. With a robust output of 10,000 VA, this UPS caters to various applications, from data centers to IT infrastructure, making it a versatile solution for businesses of all sizes.

One of the standout features of the SU10K is its line-interactive topology. This technology allows the UPS to correct voltage fluctuations without switching to battery mode, thereby extending battery life and providing a stable power supply to connected devices. This is particularly beneficial for equipment that is sensitive to power quality, such as servers, networking gear, and telecommunications systems.

The SU10K is equipped with a reliable battery system that ensures a continuous power supply during outages. Its hot-swappable batteries make maintenance convenient, allowing users to replace batteries without powering down connected equipment. This feature minimizes downtime, ensuring that critical systems remain operational at all times.

The unit offers a wide range of output options, allowing users to configure the UPS according to their specific needs. With multiple output receptacles, including both NEMA and IEC connectors, the SU10K can accommodate various devices, ensuring flexibility in the setup. The UPS also supports advanced power management features, including SNMP, allowing for remote management and monitoring through network integration. This capability enables IT administrators to keep a close eye on power usage and battery health and receive alerts about potential issues.

In addition to its technical features, the Tripp Lite SU10K boasts a compact design that enables easy installation in various environments. The unit is rack-mountable, making it suitable for traditional server racks or cabinet installations. Its design also incorporates advanced cooling technology, ensuring efficient heat dissipation during operation to enhance performance and extend equipment lifespan.

Furthermore, the SU10K's LCD display provides users with real-time information regarding power status, battery condition, and load capacity, facilitating quick assessments and decision-making. Overall, the Tripp Lite SU10K combines robust technology with user-friendly features, making it an excellent choice for safeguarding critical equipment and ensuring business continuity in the face of power challenges.