Tripp Lite SU2200XLA warranty Specifications, System Overview, Output, Input, Battery

True on-line, double conversion UPS provides a constant, pure sine wave AC output

Maintains continuous operation through blackouts, brownouts, voltage fluctuations and surges with zero transfer time

Zero transfer time, on-line, double-conversion and economy-mode operation supported

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

Accepts input voltages between 80V and 138V (65V to 138V at loads under 70%), regulating output to 120V AC +/-2%

2200VA/1600W output capacity with 7 total outlets (6 NEMA5-15/20R and 1 L5-20R)

Two built-in individually switchable load banks, each with three outets, can be controlled via software interface to selectively reboot remote equipment or automatically shed less critical loads to extend battery runtime for the most critical equipment

Standard internal battery set provides 14 min. runtime at half load and 4.5 min. at full load

Runtime is expandable with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs

Attractive all-black upright tower format

Simultaneous communications via HID-compliant USB port, serial port, and SNMP/web card slot

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

DB9 serial network interface supports RS-232 and contact closure messaging

Slot for optional SNMP/web card (part #: SNMPWEBCARD)

Included PowerAlert UPS Power Management Software and cabling provides monitoring of in-depth site power conditions, full UPS status and fault warnings, output load level and load bank power control

Compatible with Tripp Lite's WatchDog Service Monitoring and Control Software (part# WATCHDOGSW)

Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service

Diagnostic LEDs

$250,000 Ultimate Lifetime Insurance coverage for conbnected equipment(USA & Canada only) 2-year product warranty

Specifications

SYSTEM OVERVIEW

Voltage	120V AC (110/120V)
compatibility
Frequency	50/60 Hz compatible (auto-sensing)
compatibility
OUTPUT
Output VA	2200
Output watts	1600
Output nominal	120V AC (110/120V)
voltage
Output voltage	Maintains full-time sine wave output within 2% of selected nominal, less than 3% total harmonic distortion (linear load) /
regulation	5% total harmonic distortion (computer load) (Less than 5% THD on-line and on-battery)
Output frequency	Regulates line frequency to 50/60Hz +/- 0.05Hz
regulation
Outlet quantity /	6 x NEMA 5-15/20R, 1 x NEMA L5-20R
type
Customized load	2 controllable load banks, each with 3 outlets, support load shedding and remote reboot on demand of locked network
management	devices
receptacles
Overload protection	30A input breaker
INPUT

Maximum input amps

Input connection type

Input cord length

Recommended Electrical Service

BATTERY

16A (120V) / 17.6 (110V)

NEMA 5-20P (user-installable NEMA 5-15P also included)

10ft / 3m

120V 20A dedicated circuit