Voltage Regulation, Physical | Tripp Lite SU6000RT3UHV specs

Battery recharge rate

Less than 8 hours to 90% (included battery set only)

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

On-line, double-conversion process give this UPS the ability to maintain output voltage within +/-2% of selected nominal voltage at all times

Maintains continuous operation without using battery power during overvoltages to 276VAC, regulating output within 2% of selected nominal

Maintains continuous operation without using battery power during brownout / undervoltage conditions to 156VAC, regulating output within 2% of selected nominal

LEDS ALARMS & SWITCHES

Front panel LEDs

6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation. SELECTABLE LCD DISPLAY: input/output voltage, Hz, battery voltage and charge level and detailed warnings regarding all major UPS functions. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations.

Alarms

Switches

Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete

Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions

SURGE / NOISE SUPPRESSION

AC suppression	Instantaneous
response time

EMI / RFI AC noise	Yes
suppression

PHYSICAL
Shipping weight	323
(lbs)

Shipping weight	145.4
(kg)

Unit weight (lbs)	Power Module 43.8 lbs., Battery Pack: 139 lbs.

Unit weight (kg)	Power Module: 19.7 kg, Battery Pack: 61kg

Unit Dimensions	Power Module 5.25 x 17.5 x 26, Battery Pack 5.25 x 17.5 x 25
(HWD/in)

Unit Dimensions	Power Module 13.3 x 44.5 x 66, Battery Pack 13.3 x 44.5 x 63.5
(HWD/cm)

Material of	Steel
construction

Form factors	Rack (6U)
supported

Cooling method	Built-in cooling fan

Battery Access	User replaceable, hot swappable external battery pack

ENVIRONMENTAL
Relative Humidity	0 to 95%, non-condensing

Storage	+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Temperature

Operating	+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Temperature

Line mode BTU/hr.	1418
(Max.)

COMMUNICATIONS
Network	Includes 2 built-in DB9 monitoring ports (1-RS232 / 1-contact closure)
monitoring port

Software and	Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling
cabling included	included.

SNMP compatibility

Built-in accessory slot accommodates internal SNMP / Web card and other network accessories