Replacement battery cartridge (internal UPS battery replacement)
Battery Access
Battery replacement description
Front panel battery access door
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Undervoltage correction
Online,
2% output voltage regulation during overvoltages to 280V (full load) / 300V (90% load or less)
2% output voltage regulation during undervoltages to 156V (full load) / 100V (50% load or less)
LEDS ALARMS & SWITCHES
LED Indicators
Front panel LCD display
Alarms
Alarm cancel operation
Switches
6 LEDs indicate line power, online mode, economy/bypass mode,
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats (see manual)
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
Alarm cancel switch
2 Switches control off/on power status and
SURGE / NOISE SUPPRESSION
UPS AC suppression response time
EMI / RFI AC noise suppression
PHYSICAL
Instantaneous
Yes
Installation form factors supported with included accessories
4 post 19 inch rackmount (mounting rail kit included)
Included mounting accessory description
Installation form factors supported with optional accessories
2 sets of adjustable 4 post rack rails included
2 post rackmount (2POSTRMKITWM); Tower
Optional mounting accessory notes
Primary form factor
UPS / Power Module dimensions in primary form factor (height x width x depth / inches)
2 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate 4U power module and 2U transformer
Rackmount
6.85 x 17.5 x 20.7
UPS / Power Module dimensions in primary form factor (height x width x depth / cm)
17.4 x 44.5 x 52.6