RV1012ULHW serves as an automotive or stationary 
Supports 120V AC output from a 120V AC line power source or 12V DC battery source
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
1000 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds 
OverPower inverter output supports longer duration overloads to 150% for 
3 stage, selectable 14/55 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire 
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Reliability enhanced 
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, 
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status 
Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings
Resettable 12A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Includes battery temperature sensor with 20 foot cable to prolong battery life by adjusting the charge level based on battery temperature 
Automatic Generator Starter jack enables user configuration of automatic generator startup as inverter batteries drop to 11.5VDC and generator shutoff as inverter batteries are recharged to 14.1VDCRV1012ULHW specifications
The Tripp Lite RV1012ULHW is an exceptional power inverter designed specifically for RV enthusiasts and mobile technology users. This device allows users to convert 12V DC power from their vehicle’s battery into 120V AC power, which can be utilized to run various electrical devices while on the road or at camping sites.One of the standout features of the RV1012ULHW is its pure sine wave output. This technology ensures that the inverter produces clean and stable electricity, replicating the type of power that is typically found in household outlets. Pure sine wave power is crucial for sensitive electronic devices, as it helps to prevent potential damage and ensures optimal performance. This makes the RV1012ULHW perfect for operating appliances such as laptops, televisions, and medical equipment.
The inverter boasts a 1000W continuous power and a 2000W peak power capacity. This significant wattage allows users to run multiple devices simultaneously without worrying about overloading the inverter. The RV1012ULHW features a user-friendly design, complete with easy-to-read LED indicators that display power status and output levels, facilitating straightforward monitoring of power usage.
Safety is a priority in the design of the RV1012ULHW, which incorporates several protective mechanisms, such as overload, over-voltage, under-voltage, and short-circuit protection. These features enhance safety, preventing damage to both the inverter and the connected devices. Additionally, the inverter comes equipped with built-in cooling fans which help to dissipate heat, ensuring reliable operation even during extended use.
Another notable characteristic of the RV1012ULHW is its compact and lightweight design, which is essential for RV and mobile environments where space is often at a premium. Its multiple mounting options allow for versatile installation configurations, making it convenient for various setups.
In conclusion, the Tripp Lite RV1012ULHW is an ideal solution for anyone in need of reliable and efficient power on-the-go. With its pure sine wave output, powerful performance, and robust safety features, this inverter stands out as a dependable choice for RV owners and outdoor enthusiasts. Whether camping, tailgating, or exploring the open road, the RV1012ULHW ensures that users stay connected and powered up wherever their adventures may take them.