Features
Remote User Interface (RUI):
“Power” Button: This button turns the Power Supply Module’s outlets (and any connected equipment) on and off.
To turn the Power Supply Module’s outlets ON: Press and hold the “Power” button for one second. The alarm will beep once briefly after one second has passed. Release the button. The “Power” LED will illuminate. The “Power” button will turn the outlets on regardless of whether the Power Supply Module is plugged in or not.
To turn the Power Supply Module’s outlets OFF: Press and hold the “Power” button for one second. The alarm will beep once briefly after one second has passed. Release the button. The “Power” LED will turn off.
Alarm Mute Button: This button silences the Power Supply Module's low battery alarm. To silence the low battery alarm, briefly press and release the Alarm Mute button. The low battery alarm will beep once per second unless it is silenced. Once the charge level falls below 30% (and shutdown is imminent) the alarm will resume again after one minute. Once the charge level falls below 30%, the user should save open files and safely shut down connected equipment immediately. If the cart is unattended and PowerAlert Software is loaded on a computer connected to the Power Supply Module, PowerAlert will automatically save open files prior to automatic shutdown.
“Power” LED: This green LED indicates whether the Power Supply Module’s outlets are ON or OFF.
Battery Charge LED Meter: These LEDs will illuminate in several sequences to indicate the approximate charge level of the Battery Module. See “Operation” section for charts illustrating Battery Charge LED Meter Display depending on different charge levels while discharging and charging.
Communications Jacks: Connect the RUI to the Power Supply Module.
Power Supply Module:
AC Outlets: Provide filtered, pure
Coiled AC Input Cord with
Supply Module to any 120V AC wall outlet.
8