Safety
This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems.
UPS Location Warnings
•Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.
•For best performance, keep the indoor temperature between 0° C and 40° C (between 32° F and 104° F).
•Leave adequate space around all sides of the UPS for proper ventilation.
UPS Connection Warnings
•If your UPS has a corded input, connect it to a properly grounded AC power outlet. Do not modify the UPS's plug. Do not use adapters that eliminate the UPS's connection to ground.
•If your UPS has a hardwired input, ensure that it is properly grounded.
•Do not plug your UPS into itself; this will damage the UPS and void your warranty.
•If you are connecting your UPS to a
Equipment Connection Warnings
•Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a
•Do not connect surge suppressors to the output of your UPS. This may damage your UPS and will void both the surge suppressor and UPS warranties.
Battery Warnings
•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no
•Battery replacement must be performed by qualified service personnel. Because the batteries present a risk of electrical shock and burn from high
•The UPS batteries are recyclable. Refer to local codes for disposal requirements, or in the US only call
•When adding external batteries, connect only Tripp Lite battery packs of the correct voltage and type. Your UPS's External Battery Connector should match the color of the connector of any battery pack you want to connect.
2