Tripp Lite 93-1911 warranty Specifications Hardwired Models

Specifications (Hardwired Models)

HARDWIRED MODELS:	APS 2012	APS2424
Weight:	38.0 lbs.	41.0 lbs.
INVERTER
Continuous power (@ 20° C):	2000 W	2400 W
Surge power (5 seconds):	4000 W	4800 W
Efficiency (Full Load):	90%	90%
Minimum DC Fuse Rating:	500A	300A
DC Input Current @ Nominal V DC
Full Load	192 A	112 A
No Load	2.5 A*	1.5 A*
Nominal Input Volts:	12 VDC	24 VDC
DC Input Voltage Range:	10-15 VDC	20-30 VDC
Nominal Output Volts:	120 VAC ±5%	120 VAC ±5%
Nominal Output Frequency:	60 Hz ±.3%	60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:	60 A	30 A
Maximum Cable Length	1 ft.	3 ft.
Acceptance Volts VDC:	Selectable	Selectable
	14.4 V**/14.2 V Wet**/Gel	28.8 V**/28.4 V Wet**/Gel
Float Volts VDC (w/gel):	13.3 V (13.6 V)	26.6 V (27.2 V)
Input Voltage AC:	120 V	120 V
Input Current AC:	16 A	16 A
LINE VAC OPERATION
Minimum Input AC Volts:	Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):	Selectable 135** or 145 VAC	Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):	32 A	36 A
Input Frequency:	60 Hz ±10%	60 Hz ±10%
Maximum Output AC (Continuous)	16.7 A	20 A
Automatic Transfer Time:	4-6 ms	4-6 ms

HARDWIRED MODELS (Cont.):	APS 2448		APS3636VR
Weight:	38.0 lbs.		56.9 lbs.
INVERTER
Continuous power (@ 20° C):	2400 W		3600 W
Surge power (5 seconds):	4800 W		7200 W
Efficiency (Full Load):	90%		89%
Minimum DC Fuse Rating:	300A		300A
DC Input Current @ Nominal V DC
Full Load	56	A	114 A
No Load	1.5 A*		1.7 A*
Nominal Input Volts:	48 VDC		36 VDC
DC Input Voltage Range:	40-60 VDC		30-45 VDC
Nominal Output Volts:	120 VAC ±5%		120 VAC ±5%
Nominal Output Frequency:	60	Hz ±.3%	60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:	15	A	30 A
Maximum Cable Length	12 ft.		4.5 ft.
Acceptance Volts VDC:	Selectable		Selectable
	57.6 V**/56.8 V Wet**/Gel		43.2 V**/42.6 V Wet**/Gel
Float Volts VDC (w/gel):	53.2 V (54.4 V)		39.9 V (40.8 V)
Input Voltage AC:	120 V		120 V
Input Current AC:	16	A	24 A
LINE VAC OPERATION
Minimum Input AC Volts:	Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):	Selectable 135** or 145 VAC		Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):	33	A	54 A***
Input Frequency:	60	Hz ±10%	60 Hz ±10%
Maximum Output AC (Continuous)	20	A	30 A
Automatic Transfer Time:	4-6 ms		4-6 ms

*Load sense can reduce this to 1/30 of the listed current. **Factory default setting. ***When AVR is boosting incoming current.

15