Tripp Lite 450 RT Safety, UPS Location Warnings, UPS Connection Warnings, Battery Warnings

Page 2

Safety

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

•For best performance, keep the indoor temperature between 32° F and 104° F (between 0° C and 40° C).

•Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

•Connect your UPS to a three-wire, grounded AC power outlet. Do not remove or modify the ground pin of the UPS's plug.

•Do not use two-prong adapters with the UPS's plug. Do not plug your UPS into itself; this will damage the UPS and void your warranty.

•If you are connecting your UPS to a motor-powered AC generator, the generator must provide clean, filtered computer-grade output.

•Use only the power supply cord provided with this unit. The power cord for the UPS is wired in accordance with National Electrical Code (NEC) specifi- cations. Be sure that your wall outlet is also wired to these specifications.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user-serviceable parts inside.

•Battery replacement must be performed by qualified service personnel. Because the batteries present a risk of electrical shock and burn from high short-circuit current, qualified service personnel should observe proper precautions: Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles and replace the existing batteries with the same number and type of new batteries (Sealed Lead- Acid). Do not open the batteries. Do not short or bridge the battery termi- nals with any object.

•The UPS batteries are recyclable. Refer to local codes for disposal require- ments or call 1-800-SAV-LEAD (1-800-728-5323) for complete recycling information. Do not dispose of the batteries in a fire.

•Do not attempt to add external batteries.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation UPS Location Warnings SafetyBattery Warnings UPS Connection WarningsInstallation MountingBy pressing the Main Power Switch, holding it for 3 seconds and releasing itTurn your UPS on Basic Operation SwitchMain Power Switch Indicator Lights Other UPS Features Service Storage & ServiceSpecifications StorageInstalación Páginas 11 Advertencias sobre la Conexión del Sistema UPS / No-break SeguridadAdvertencias sobre la Instalación del Sistema UPS/No-break Advertencias sobre la Conexión de EquiposInstalación MontajeConexión Operación Básica InterruptorLuz Backup/Low Batt Energía de Respaldo/Batería Desgastada Luces IndicadorasOtras Características del Sistema UPS/No-break Receptáculos de CA Respaldados por la Batería de RespaldoAmacenaje y Servicio EspecificacionesSûreté Recommandations relatives à la Connexion du Matériel Recommandations relatives à l’Emplacement de l’UPSRecommandations relatives à la Connexion de l’UPS Recommandations relatives à la BatterieBureau/Sous-Moniteur MontageMontage en version Rack Tour VerticaleExtrémités de la prise ConnexionBranchez une des Commutateur d’Alimentation Principale Operation De BaseCommutateur DEL de Fault/Overload Défaut/Surcharge Voyants de SignalisationDEL de Backup/Low Batt Sauvegarde/Batterie Faible DEL de Replace Batt Remplacement de la BatterieAutres Dispositifs dUPS Entreposage Entreposage & ServiceCaracteristiques

450 RT specifications

The Tripp Lite 450 RT is a versatile and reliable uninterruptible power supply (UPS) designed to protect critical electronic equipment from power disruptions. With a capacity of 450 VA, this UPS is suited for small to medium devices, ensuring that your hardware remains operational during unexpected outages or voltage fluctuations.

One of the standout features of the Tripp Lite 450 RT is its line-interactive topology, which utilizes automatic voltage regulation (AVR). This technology helps to maintain a stable output voltage by correcting minor fluctuations without switching to battery power, ultimately extending battery life and providing a smoother operation for connected devices. The UPS is equipped with a built-in charger that ensures quick recharging of the internal batteries, facilitating short downtime during power interruptions.

The Tripp Lite 450 RT offers multiple outlets, typically comprising several NEMA 5-15R receptacles that accommodate standard electrical plugs. This design allows users to connect multiple devices, from computers and networking equipment to home theater systems, ensuring that various components remain powered. Additionally, the unit features an LCD screen that provides real-time information about the UPS status, including battery charge level, load capacity, and any active alerts.

Another significant advantage of the Tripp Lite 450 RT is its compact and rack-mountable design. It can easily be integrated into small server rooms or home offices without occupying too much space. Its lightweight structure enhances portability, making it convenient for transport and positioning in various environments.

The UPS is designed with customer satisfaction in mind, offering features such as USB connectivity for smart communication with compatible systems. This allows users to monitor the UPS status and configure settings directly from their computers through Tripp Lite's software.

Protection is a crucial characteristic of the Tripp Lite 450 RT. It features built-in surge protection to guard against spikes and transients, ensuring that sensitive equipment remains safe from damage due to electrical irregularities. This makes it an essential component in safeguarding investments in tech and electronic equipment.

In summary, the Tripp Lite 450 RT is a dependable UPS solution that combines line-interactive technology, multiple outlets, a user-friendly interface, and robust surge protection. Its compact design and flexibility make it an excellent choice for users looking to enhance the reliability and safety of their electronic systems.
Top Page Image Contents