Tripp Lite 450 RT specifications Other UPS Features

Page 7

Other UPS Features

7. AC Receptacles (Battery Backup Supported)

These receptacles provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. They also protect your equipment against damaging surges and line noise. Connect com- puter, monitor and other essential equipment to these receptacles.

8. AC Receptacle (Surge-Only)

This receptacle provides equipment that does not require battery backup (such as printers) with complete surge and line noise protection. Do not connect computers or other essential equipment to this receptacle.

9. “SMART” RS-232 Port

The RS-232 port connects your UPS to any PC or workstation. Use with Tripp Lite software and cabling to monitor and manage network power and automatically save open files and shut down equipment during a blackout. This port uses RS-232 communications to transmit UPS and power conditions.

10. Accessory Slot

Contact Tripp Lite Customer Support for more information and a list of available SNMP, network management and connectivity products.

11. Mounting Brackets

The mounting brackets are already set for mounting in standard 19 in. racks. See Installation section for using the mounting brackets to suit under-monitor, tower and wallmount applications.

12. AC Inlet Receptacle

Connect one end of the detachable line cord into this receptacle and the other end into your wall outlet.

13. Battery Replacement Door

Under normal conditions, the original battery in your UPS will last several years. Battery replacement should be performed only by qualified service personnel. Refer to “Battery Warnings” in the Safety section. When replacing batteries, qualified service personnel should follow this procedure: 1) turn UPS OFF; 2) remove the snap-on battery replacement door, on left front of unit; 3) pull batteries partially out of case; 4) make a detailed sketch of the batteries and the polarity, color and connection of all cables; 5) disconnect battery terminals; 6) dispose of used batteries; 7) reconnect replacement batteries exactly as original batteries were; 8) push batteries back into case and replace cover.*

* You may not receive full runtime until your replacement batteries have fully charged.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation UPS Connection Warnings SafetyBattery Warnings UPS Location WarningsMounting InstallationTurn your UPS on Power Switch, holding it for 3 seconds and releasing itBy pressing the Main Main Power Switch SwitchBasic Operation Indicator Lights Other UPS Features Storage Storage & ServiceSpecifications ServiceInstalación Páginas 11 Advertencias sobre la Conexión de Equipos SeguridadAdvertencias sobre la Instalación del Sistema UPS/No-break Advertencias sobre la Conexión del Sistema UPS / No-breakMontaje InstalaciónConexión Interruptor Operación BásicaLuces Indicadoras Luz Backup/Low Batt Energía de Respaldo/Batería DesgastadaReceptáculos de CA Respaldados por la Batería de Respaldo Otras Características del Sistema UPS/No-breakEspecificaciones Amacenaje y ServicioSûreté Recommandations relatives à la Batterie Recommandations relatives à l’Emplacement de l’UPSRecommandations relatives à la Connexion de l’UPS Recommandations relatives à la Connexion du MatérielTour Verticale MontageMontage en version Rack Bureau/Sous-MoniteurBranchez une des ConnexionExtrémités de la prise Commutateur Operation De BaseCommutateur d’Alimentation Principale DEL de Replace Batt Remplacement de la Batterie Voyants de SignalisationDEL de Backup/Low Batt Sauvegarde/Batterie Faible DEL de Fault/Overload Défaut/SurchargeAutres Dispositifs dUPS Caracteristiques Entreposage & ServiceEntreposage

450 RT specifications

The Tripp Lite 450 RT is a versatile and reliable uninterruptible power supply (UPS) designed to protect critical electronic equipment from power disruptions. With a capacity of 450 VA, this UPS is suited for small to medium devices, ensuring that your hardware remains operational during unexpected outages or voltage fluctuations.

One of the standout features of the Tripp Lite 450 RT is its line-interactive topology, which utilizes automatic voltage regulation (AVR). This technology helps to maintain a stable output voltage by correcting minor fluctuations without switching to battery power, ultimately extending battery life and providing a smoother operation for connected devices. The UPS is equipped with a built-in charger that ensures quick recharging of the internal batteries, facilitating short downtime during power interruptions.

The Tripp Lite 450 RT offers multiple outlets, typically comprising several NEMA 5-15R receptacles that accommodate standard electrical plugs. This design allows users to connect multiple devices, from computers and networking equipment to home theater systems, ensuring that various components remain powered. Additionally, the unit features an LCD screen that provides real-time information about the UPS status, including battery charge level, load capacity, and any active alerts.

Another significant advantage of the Tripp Lite 450 RT is its compact and rack-mountable design. It can easily be integrated into small server rooms or home offices without occupying too much space. Its lightweight structure enhances portability, making it convenient for transport and positioning in various environments.

The UPS is designed with customer satisfaction in mind, offering features such as USB connectivity for smart communication with compatible systems. This allows users to monitor the UPS status and configure settings directly from their computers through Tripp Lite's software.

Protection is a crucial characteristic of the Tripp Lite 450 RT. It features built-in surge protection to guard against spikes and transients, ensuring that sensitive equipment remains safe from damage due to electrical irregularities. This makes it an essential component in safeguarding investments in tech and electronic equipment.

In summary, the Tripp Lite 450 RT is a dependable UPS solution that combines line-interactive technology, multiple outlets, a user-friendly interface, and robust surge protection. Its compact design and flexibility make it an excellent choice for users looking to enhance the reliability and safety of their electronic systems.
Top Page Image Contents