Tripp Lite Official User Manuals and Beep/Error Codes for OMNIVS Series UPS
Page 5

Basic Operation continued

MUTE/TEST Button:

Silence the UPS On-Battery Alarm: Press and hold this button to silence the UPS on-battery alarm, a series of short beeps followed by a brief pause that is activated when the UPS is providing AC power from battery. Note: When the battery is nearly depleted, the low battery alarm—a continuous beep that cannot be silenced—will warn to shut down connected equipment immediately.

Run a Self-Test: To run a self-test, leave connected equipment on. With the UPS plugged in and ON, press and hold the button until the UPS beeps (about 2 seconds) then release it.

Self-Test Results: All LEDs will be lit and the UPS will emit several short beeps as it momentarily switches to battery to test charge and load capacity. The test will last up to 10 seconds. If the inverter is overloaded, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, remove some of the load from the “UPS/Surge” outlets and run the self-test again. If the batteries are weak, the “ ” LED will stay lit and the UPS will continue to beep after the test. If this happens, let the UPS charge its batteries for 12 hours and repeat the test. If the condition persists, contact Tripp Lite for service. CAUTION: Do not unplug the UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into network connections.

Indicator Lights

All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and turned on.

LINE POWER: This green light will illuminate whenever the UPS is ON and receiving normal AC line power.

BATTERY POWER: This yellow light will illuminate when the UPS is providing equipment with battery power.

REPLACE BATTERY: This red light will illuminate continuously after the UPS runs a self-test to indicate that the battery is weak. If it remains lit after allowing the UPS to charge for twelve hours and running a second self-test, contact Tripp Lite for service.

OVERLOAD: This red light will illuminate continuously to indicate that the UPS is overloaded when the UPS is providing power from battery or after the UPS runs a self-test. If it lights up, immediately remove some of the equipment connected to the “UPS/Surge” outlets and run a self-test. Large overloads may cause the UPS to shut down.

“VOLTAGE CORRECTION” LED (select models only): Lights green whenever your UPS is automatically correcting high or low AC line voltage. The UPS will also click gently. These are normal, automatic operations of your UPS, and no action is required on your part.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Español Français Battery Warnings Important Safety InstructionsUPS Location Warnings UPS Connection WarningsPlug your equipment into UPS Select UPS Operating ModeConnect the UPS to 120V AC electrical outlet External Battery Connection Quick Installation optionalPhone Line/Network Line Surge Suppression OMNIVS1500XL onlyIndicator Lights Other UPS Features Storage ServiceSistemas UPS Omni VS Advertencias sobre la ubicación del UPS Importantes instrucciones de seguridadAdvertencias sobre la conexión del UPS Advertencias sobre la conexión de equiposSelección del modo de operación del UPS Conecte el sistema UPS a una toma de corriente de la CAConecte sus equipos con El UPS Instalación rápida optativo Luces indicadoras Operación básica continuaciónOtras prestaciones del UPS OMNIVS1500XL Servicio AlmacenamientoSystèmes UPS Omni VS Importantes consignes de sécurité Mises en garde relatives à lemplacement du système UPSMises en garde relatives au raccord du système UPS Mises en garde relatives au raccord de léquipementBranchez votre système UPS dans une prise de secteur de C.A Choix du mode dexploitation du système UPSCommutateurs Installation rapide facultativeVoyants lumineux Exploitation de base suiteAutres fonctions Voyants lumineux suiteOMNIVS1500XL Entretien Entreposage200707074
Related manuals
Manual 28 pages 21.52 Kb Manual 24 pages 47.04 Kb

OMNIVS1000, OMNIVS1500XL, OMNIVS1500, OMNIVS800 specifications

Tripp Lite’s OMNIVS series of uninterruptible power supplies (UPS) is designed to provide reliable protection for home and office electronics. The models in the series, including the OMNIVS1500XL, OMNIVS1000, OMNIVS800, and OMNIVS1500, deliver key features that enhance performance, efficiency, and user experience.

The OMNIVS1500XL is the highest capacity model in the series, offering 1500 VA / 900 Watts of power. It features automatic voltage regulation (AVR), which stabilizes voltage fluctuations without switching to battery power, ensuring that connected equipment receives consistent power. The LCD display provides real-time data on battery status, load levels, and estimated runtime, making it easy for users to monitor their power situation.

The OMNIVS1000, with a capacity of 1000 VA / 600 Watts, meets the needs of users who require reliable power for desktop computers, networking equipment, and other sensitive electronics. Like its larger counterpart, this model includes AVR and a user-friendly LCD interface. With several outlets, it enables multiple devices to be protected simultaneously, ensuring that everything from gaming consoles to home office equipment remains powered during outages.

For users with lighter power requirements, the OMNIVS800 delivers a capacity of 800 VA / 450 Watts. This model is ideal for more compact setups, providing enough power for essential devices while still maintaining the features that Tripp Lite is known for, such as AVR and a clear LCD display.

The OMNIVS1500 combines a balance of power and features, making it a versatile choice for small to medium office environments. Featuring a capacity of 1500 VA / 900 Watts, it is equipped with multiple outlets to accommodate various devices.

All models in the OMNIVS series feature advanced battery technology, ensuring efficient power management and long life. They come equipped with a range of outlets, including surge-protected and battery-backed options, enabling users to prioritize the protection of sensitive equipment. Additionally, the compact design of these UPS units allows for easy integration into various environments, whether on a desktop or tucked away in a rack.

Overall, the Tripp Lite OMNIVS series provides an effective solution for safeguarding essential electronics against power disruptions while offering features that enhance usability and performance across different models.
Top Page Image Contents