Installation
Mounting the PDU
The PDU supports four primary mounting configurations: 1U Rack, 0U Rack, Wall and Under-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting configurations may vary.
1-11U Rack Mounting. Attach the PDU to the rack by inserting four user-supplied screws A through the PDU mounting brackets B and into the mounting holes of the rack rail as shown.
1-20U Rack Mounting. Remove the screws C attaching the mounting brackets to the PDU, change the orientation of the brackets as shown and reattach the brackets. Use only the screws supplied by the manufacturer or their exact equivalent (#6-32, 1/4" flat head). Attach the PDU vertically by inserting two or more user- supplied screws A through the PDU mounting brackets B and into mounting points in the rack or rack enclosure.
1-3Wall or 1-4Under-Counter Mounting. Remove the screws C attaching the mounting brackets to the PDU, change the orientation of the brackets as shown and reattach the brackets. Use only the screws supplied by the manufacturer or their exact equivalent (#6-32, 1/4" flat head). Attach the PDU to a stable mounting surface by inserting two or more user-supplied screws A through the PDU mounting brackets B and into secure points on the mounting surface.
Connecting the PDU
The PDU includes two AC power inputs: Primary and Secondary. The Primary input cord is permanently attached to the rear of the PDU. The Secondary input cord is detachable and
connects to the IEC power inlet 2 at the rear of the PDU (PDUMH15AT - IEC-320-C14 inlet; PDUMH20AT - IEC-320-C20 inlet).