Tripp Lite 220/230/240V AC / 12W owner manual Communications, Operation of Manual Bypass Switch

Page 12

Operation (Special Conditions) (continued)

OPERATION OF MANUAL BYPASS SWITCH

Turn this switch to “BYPASS” before performing any maintenance on the UPS with the connected load supported. Connected equipment will receive filtered AC mains power, but will not receive battery power in the event of a blackout.

SWITCHING UPS TO “BYPASS” MODE

•Turn the “ON/OFF” Switch OFF. (LCD will read "ON BYPASS.")

•Turn the “Manual Bypass” Switch clockwise from NORMAL to BYPASS.

•Turn the AC Input Circuit Breaker OFF.

SWITCHING UPS TO “NORMAL” MODE

•Turn the AC Input Circuit Breaker ON.

•Turn the “Manual Bypass” Switch counterclockwise from BYPASS back to NORMAL.

•Turn the “ON/OFF” Switch ON.

Communications

RS-232 INTERFACE

This female DB9 port connects your UPS via an RS-232 cable to a workstation or server equipped with Tripp Lite software. The port uses RS-232 communications to report UPS status and power conditions. Using this port, Tripp Lite software can monitor and manage network power and automatically save open files and shut down equipment during a blackout. Contact Tripp Lite Customer Support at (773) 869- 1234 for information on available SNMP, network management and connectivity software and products.

RS-232 signals and operations include: load level, battery status, battery level, operation mode, AC input voltage, AC output voltage, AC input frequency, temperature inside unit, set shut-down delay time, enable/disable alarm and remote shutdown.

Hardware:

 

Baud Rate:

2400 BPS

Data Length:

8 bits

Stop Bit:

1 bit

Parity:

NONE

Pin assignment:

Pin 2: TXD (Transmit Data)

Pin 3: RXD (Receive Data)

Pin 5: GND (Signal Ground)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 16/31/46/61 Important Safety Warnings Battery WarningsUPS Location Warnings UPS Connection WarningsControl Panel Front PanelRear Panels Installation Inverter Operation DIP Switch SettingsInput Voltage Selection Input Frequency SelectionOperational Mode Selection UPS LocationInput and Output Connection External Battery Module Connection required Battery Condition VerificationOperation Normal Conditions Turning the UPS onTurning the UPS OFF SELF-TESTING LCD Display Select Switch Operation Special ConditionsOperation on BYPASS-VOLTAGE OUT of Range Battery Charge Warnings Operation on OverloadOperation Under Shutdown Operation of Manual Bypass Switch Switching UPS to Bypass ModeSwitching UPS to Normal Mode CommunicationsAS-400 Interface DRY Contact InterfaceService WarrantyRemote Emergency Power OFF EPO Year Limited WarrantySpecifications Model SU10K3/1X2009XXXXX 93-2228EN

220/230/240V AC / 12W specifications

Tripp Lite 220/230/240V AC / 12W is a versatile power solution designed to meet the needs of various electronic devices in both residential and commercial settings. This power adapter is particularly suited for users who require a steady and reliable supply of power to their equipment. It is ideal for powering network devices, security cameras, LED lights, and other low-power electronics that operate efficiently on 12 watts.

One of the standout features of this power adapter is its wide input voltage range. Operating on 220 to 240 volts AC, it is compatible with a variety of international electrical standards. This design makes it an excellent choice for travelers or businesses with operations in multiple countries. The compact and lightweight form factor allows for easy transportation and installation, making it a user-friendly option for those who need to set up power quickly and efficiently.

The Tripp Lite 220/230/240V AC / 12W is built with advanced technologies that prioritize safety and performance. It includes built-in surge protection that shields connected devices from voltage spikes and surges that can occur during electrical storms or sudden power fluctuations. Additionally, the adapter features over-current protection, which helps prevent overheating and damage to both the adapter and the devices it powers.

Another significant aspect of this model is its energy efficiency. It complies with various energy efficiency standards, which not only helps in reducing electricity bills but also minimizes the environmental impact. The unit operates with low power consumption, ensuring that it provides a stable output while being economical.

In terms of usability, the Tripp Lite adapter boasts a simple plug-and-play design. Users can easily connect their devices without the need for complex setups or additional tools. The durable construction further ensures longevity, making it a reliable choice for both personal and professional applications.

Overall, the Tripp Lite 220/230/240V AC / 12W power adapter stands out due to its combination of versatility, safety features, energy efficiency, and ease of use. Whether for home or business use, it provides a dependable solution for powering low-wattage electronic devices.
Top Page Image Contents