Tripp Lite 220/230/240V AC / 12W owner manual Important Safety Warnings, UPS Location Warnings

Page 2

Important Safety Warnings

SAVE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all Tripp Lite SmartOnline 3-Phase UPS Systems and their batteries.

UPS Location Warnings

•Install your UPS indoors, away from heat, direct sunlight, dust, and excess moisture or other conductive contaminants.

•Install your UPS in a structurally sound area. Your UPS is extremely heavy; take care when moving and lifting the unit.

•Only operate your UPS at indoor temperatures between 32° F and 104° F (between 0° C and 40° C). For best results, keep indoor temperatures between 62° F and 84° F (between 17° C and 29° C).

•Leave adequate space around all sides of the UPS for proper ventilation: 12 in. (30 cm.) clearance at the rear; 4 in. (10 cm.) at sides and on top.

•Do not install the UPS near magnetic storage media, as this may result in data corruption.

UPS Connection Warnings

•The power supply for this unit must be three phase rated in accordance with the equipment nameplate. It also must be suitably grounded according to all applicable local electrical wiring regulations.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems in life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life support device.

•Connect your UPS's Grounding Terminal to a grounding electrode conductor.

•The UPS system contains its own energy source (battery). The output terminals may be live even when the UPS is not connected to an AC supply.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user-serviceable parts inside.

•The batteries in your battery module are recyclable. Refer to local codes for disposal requirements, or if in the USA call

1-800-SAV-LEAD (1-800-728-5323)for complete recycling information. CAUTION: Do not dispose of the batteries in a fire, as this could cause the battery to explode.

•Because the batteries present a risk of electrical shock and burn from high short-circuit current, batteries should be changed only by trained service personnel observing proper precautions. Consult your battery module manual before proceeding. Remove watches, rings, and other metal objects. Use tools with insulated handles. Wear rubber gloves and boots. Do not lay tools or metal parts on top of the batteries. Do not short or bridge the battery terminals with any object. Disconnect the charging source prior to connecting or disconnecting battery terminals. Determine if the batteries are inadvertently grounded. If inadvertently grounded, remove the source of the ground. Contact with any part of a grounded battery can result in electrical shock. The likelihood of such shock will be reduced if such grounds are removed during installation and maintenance.

•Connect only Tripp Lite battery packs to your UPS's external battery connectors.

•Do not operate your UPS without batteries.

•Fuses should be replaced only by factory authorized personnel. Blown fuses should be replaced only with fuses of the same number and type.

•Potentially lethal voltages exist within this unit as long as the battery supply is connected. Service and repair should be done only by trained personnel. During any service work, the UPS should be turned off or put into manual bypass.

•During "hot-swap" battery replacement (when the UPS is on manual bypass and connected equipment is turned ON) your UPS will be unable to provide battery backup in the event of a blackout.

•Do not connect or disconnect the battery modules while the UPS is operating from the battery supply or when the unit is not in bypass mode.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 16/31/46/61 UPS Location Warnings Important Safety WarningsBattery Warnings UPS Connection WarningsControl Panel Front PanelRear Panels Input Voltage Selection InstallationInverter Operation DIP Switch Settings Input Frequency SelectionInput and Output Connection Operational Mode SelectionUPS Location External Battery Module Connection required Battery Condition VerificationTurning the UPS OFF Operation Normal ConditionsTurning the UPS on SELF-TESTING Operation on BYPASS-VOLTAGE OUT of Range LCD Display Select SwitchOperation Special Conditions Operation Under Shutdown Battery Charge WarningsOperation on Overload Switching UPS to Normal Mode Operation of Manual Bypass SwitchSwitching UPS to Bypass Mode CommunicationsAS-400 Interface DRY Contact InterfaceRemote Emergency Power OFF EPO ServiceWarranty Year Limited WarrantySpecifications Model SU10K3/1X2009XXXXX 93-2228EN

220/230/240V AC / 12W specifications

Tripp Lite 220/230/240V AC / 12W is a versatile power solution designed to meet the needs of various electronic devices in both residential and commercial settings. This power adapter is particularly suited for users who require a steady and reliable supply of power to their equipment. It is ideal for powering network devices, security cameras, LED lights, and other low-power electronics that operate efficiently on 12 watts.

One of the standout features of this power adapter is its wide input voltage range. Operating on 220 to 240 volts AC, it is compatible with a variety of international electrical standards. This design makes it an excellent choice for travelers or businesses with operations in multiple countries. The compact and lightweight form factor allows for easy transportation and installation, making it a user-friendly option for those who need to set up power quickly and efficiently.

The Tripp Lite 220/230/240V AC / 12W is built with advanced technologies that prioritize safety and performance. It includes built-in surge protection that shields connected devices from voltage spikes and surges that can occur during electrical storms or sudden power fluctuations. Additionally, the adapter features over-current protection, which helps prevent overheating and damage to both the adapter and the devices it powers.

Another significant aspect of this model is its energy efficiency. It complies with various energy efficiency standards, which not only helps in reducing electricity bills but also minimizes the environmental impact. The unit operates with low power consumption, ensuring that it provides a stable output while being economical.

In terms of usability, the Tripp Lite adapter boasts a simple plug-and-play design. Users can easily connect their devices without the need for complex setups or additional tools. The durable construction further ensures longevity, making it a reliable choice for both personal and professional applications.

Overall, the Tripp Lite 220/230/240V AC / 12W power adapter stands out due to its combination of versatility, safety features, energy efficiency, and ease of use. Whether for home or business use, it provides a dependable solution for powering low-wattage electronic devices.
Top Page Image Contents