Tripp Lite B119-2X2, B119-4X4 owner manual RS-232 Serial Control

RS-232 Serial Control

Before using RS-232 Serial Control, you must first go into your Terminal Emulation Software and update the COM port settings.

1Go to the Setup drop-down menu and select the Serial Port option.

2Select the COM port that is being used, and update the remaining settings as follows: Baud Rate (57600), Data (8 bit), Parity (none), Stop (1 bit), Flow Control (none).

6

13-08-038-9332BC.indd 6 8/5/2013 12:26:38 PM