Tripp Lite IBV-12 owner manual Safety, Quick Installation

1111 W. 35th Street

Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

Owner's Manual

IBV-12

Diagnostic Surge Suppressor (120V)

ESPAÑOL : p. 4

FRANÇAIS : p. 7

Safety

•Install your surge suppressor indoors, away from excess moisture, heat and dust.

•Connect your surge suppressor to a three-wire, grounded AC power outlet. Do not remove or modify the ground pin of the surge suppressor's plug. Do not use two- prong adapters with the surge suppressor's plug.

•The total power draw of all equipment connected to your surge suppressor should not exceed 12 amps.

•Your surge suppressor does not require maintenance. Do not open your surge suppressor for any reason. There are no user-serviceable parts inside.

Quick Installation

1 Plug surge suppressor into a three- wire, grounded 120V electrical outlet.

The surge suppressor cannot provide full protection unless it is plugged into a properly wired and grounded outlet.

2 Flip surge suppressor’s ON – OFF switch ON (switch will light up.)

When this switch is lit, it indicates that AC power is enabled at the surge suppressor's outlets.

3 Plug the power cords of your electrical equipment into your surge suppressor's outlets.

Your electrical equipment is now protected from AC surges on the power line.

Copyright © 2000 Tripp Lite. All rights reserved.

1