Philips MX3910D/37 owner manual Setting the digital output Setting the PCM output

E n

DVD Menu Options

Setting the digital output Setting the PCM output

g l i s h

Set Digital Output according to the optional audio equipment you connected.

Follow the steps of “Using the Setup Menu” and select :

> Digital Output

Digital Output	Off
Night mode	All
	PCM only
Analog Output

Speakers

Speaker Layout

PCM Output

Set Digital Output

Off

Select this to deactivate the digital output.

All

Select this if you have connected the digital output to an optional piece of audio equipment that has a multichannel decoder.

PCM only

Select this if the optional audio equipment is not capable of decoding multichannel audio. After that, proceed to “Setting the PCM output.” Once you select “PCM only” the surround mode will automatically change to “STEREO”.

Set your PCM (Pulse Code Modulation) output only after you have set the system’s Digital Output to ‘PCM only.’ (See “Setting the digital output”.)

Follow the steps of “Using the Setup Menu” and select :

> PCM Output

Digital Output
Night mode
Analog Output
Speakers
Speaker Layout	48 kHz
PCM Output	96 kHz

Set PCM output to 48K or 96K

48 kHz

Select this if the optional audio equipment is incapable of processing

96 kHz digital signal input. The signal will then be converted to a standard signal with sampling rates of 48 kHz.

96 kHz

Select this if the optional audio equipment is capable of processing digital signal input with sampling rates of 96 kHz. However, if the sound output is distorted or there is no sound, select ‘48 kHz’ instead.

30