Tripp Lite U209-004 user manual Testing DB-9 serial ports in HyperTerminal, Running Hyperterminal

Page 35

Making external connections

Tripp Lite USB to Serial Adapter User’s Manual

Figure 39 illustrates the RS- 232C pinouts for typical DTE- to-DCE and DTE-to-DTE (null modem) cables with 25-pin connectors.

Figure 39 - Cabling requirements for RS-232C devices

Testing DB-9 serial ports in HyperTerminal

This section explains how to test the functionality of your USB serial adapter using Hyperterminal. Follow the directions under Running Hyperterminal below.

Running Hyperterminal

Note: Use the DB-9 loopback connector that shipped with your USB to Serial Adapter.

This procedure explains how to troubleshoot RS-232 DB-9 serial ports using Hyperterminal.

Before testing your serial ports, you must first hook up a loopback. A loopback connects the output signal (TxD) to the input signal (RxD) in a single serial port connector to make it seem like there are two ports connected together.

A loopback connector shipped with your USB adapter. Use it to test each individual serial port in Hyperterminal.

Step

Procedure

Description

!

Step 1

Launch HyperTerminal.

In Windows, select Programs/

 

 

 

Accessories/ Communications/

 

 

 

HyperTerminal.

 

 

 

 

!

Step 2

Connect the loopback connector to the

You will need to test each port

 

 

port you wish to test.

individually.

!

Step 3

Create a new session.

When prompted, give the session any

 

 

 

name you wish.

!Step 4 Select the COM # associated with the port you are testing from the drop down list.

You are now set up to test that serial port.

Note: Leave all settings at default.

!Step 5 With the session open, type any text.

If the text you type is echoed on the screen, the port is functioning properly.

!Step 6 Close the session.

!Step 7 Repeat steps 2 through 6 for each serial port in turn.

Page 30

Rev 2.0 (5/30/2003)

Image 35
Contents U209-004 Page Table of contents Figures Tables System requirements Getting started IntroductionA single box Complete USB adapter package shipsInstalling under Windows XP Installing the USB to serial adapterSerial USB adapter Windows searches for drivers forHas not yet tested the software. Note that Wizard installs the software promptInstalling prompt Starts and indicates that Windows XPSerial USB ports USB adapter installation isComplete. Next, the Wizard installs Install software for USB serial portUSB driver location. If necessary This is the CD that shipped with yourUSB to serial Adapter Wizard should go automatically toWizard briefly displays the Unknown Hardware found and Installing messagesAs it installs the serial USB port Your USB to Serial Adapter installation is completeHardware prompt displays Installing under WindowsUninstalling from Windows XP Hardware Wizard. The Found newLocate driver files prompt displays Search for or display driversThis is the CD that shipped with the USB to Serial Adapter Drivers If necessary, you can also select SpecifyLocation and browse to the desired Location with the USB to Serial AdapterSoftware does work properly with Please wait while the Wizard installsFinished installing prompt Starts and indicates that WindowsUSB ports Win 2000 Finished installing promptWin 2000 Search for or display device driver prompt Search for or display device driverAdapter drivers If necessary, you can also selectSpecify a location option and browse to Location with the USB to SerialPrompt Wizard completes the installationDisplays the Installation complete Uninstalling from Windows Installing under Windows NTInstalling under Windows Me Ports Hardware Wizard to install the serialWin Me Ready to install prompt Uninstalling from Windows Me Search or select prompt displays Installing under Windows 98/98SEComputer of USB hub Win 98/98SE Search or select prompt Search for new drivers promptBy checking the CD-ROM drive check You may be able to install the softwareReady to install the best driver Installing software promptSearch or display prompt displays Win 98/98SE Finished installing software promptDevice then click the Next button From the CD, then displays the Finished Ready to install prompt displaysThis is the CD that shipped with Windows copies the appropriate filesInstallation is complete Uninstalling from Windows 98/98SEInstalling messages as it installs the rest Serial ports. When the desktopRS-232 serial connections Making external connectionsRunning Hyperterminal Testing DB-9 serial ports in HyperTerminalWin XP Using Device ManagerAccessing Device Manager Exploring Device Manager screensAdvanced Options dialog box USB Serial Port Properties dialogBox opens and displays the General tab Ports associated with the USB to Port Settings dialog box displaysSee the Data rate multiplier section on 40 for detailsOn page 40 section for details Port Settings window sets defaultSee the Setting advanced options section Values for the selected portUSB Serial Driver properties dialog Clicking Update Driver opensInstallation Wizard Revert to the previously installed driverDialog box displays USB Serial Port Settings propertiesOn page 40 for details Port Settings window can setDefaults for the selected port Box displays. See the figure on Dialog box returnsClicking OK saves any changes you Made in any of the dialog boxesWizard This option launches the InstallationDialog box Data rate multiplier Setting advanced optionsProblem Cause Solution TroubleshootingAppendix a SpecificationsAppendix B Warranty information

U209-004 specifications

The Tripp Lite U209-004 is an innovative USB hub designed to enhance connectivity for various devices while ensuring optimal performance. This compact and efficient device grants users the ability to expand their USB connection options effortlessly. With four USB 2.0 ports, the U209-004 accommodates multiple devices, allowing users to connect a variety of peripherals simultaneously, including keyboards, mice, printers, and external storage solutions.

One of the standout features of the U209-004 is its plug-and-play capability, which means that users can set it up without the need for additional drivers or complicated installation processes. Simply connecting it to a USB port on a computer or laptop instantly provides additional connectivity options. This ease of use makes it an ideal solution for both tech-savvy individuals and those who prefer straightforward setups.

The design of the Tripp Lite U209-004 is both compact and portable, making it perfect for on-the-go use. Whether at home, in the office, or while traveling, users can easily pack this lightweight hub without taking up significant space. Built from durable materials, it promises reliability and longevity, ensuring that it can withstand regular usage and transport.

In terms of technology, the U209-004 supports data transfer speeds of up to 480 Mbps, which is sufficient for most everyday applications such as transferring files or syncing devices. It also maintains backward compatibility with USB 1.1 devices, ensuring that older peripherals can still be utilized without compromising performance.

Furthermore, the Tripp Lite U209-004 incorporates built-in overcurrent protection for each port, safeguarding connected devices against power surges and potential damage. This feature enhances its utility and contributes to the overall reliability of the hub, making it a safe choice for users who connect a variety of devices.

Overall, the Tripp Lite U209-004 combines functionality, reliability, and portability, making it an excellent addition to any office setup or personal device collection. Its ability to expand connectivity options and its user-friendly design are significant benefits, catering to the needs of diverse users in today's tech-driven world. Whether enhancing productivity at work or supporting leisure activities at home, the Tripp Lite U209-004 proves to be a valuable asset.