Tripp Lite B020-008-17, B022-016, B020-016-17 warranty This package should consist

Page 1

WARRANTY FREE.com/warranty
			for		Lite
REGISTRATION				a
		today		Tripp
	online
		a
to		.tripplite
Register		win
Register
chance www
product!

Owner’s Manual

8- or 16-Port 1U Console KVM Switch or

16-Port 1U Rackmount KVM Switch

Model #: B020-008, B020-008-17, B020-016, B020-016-17 or B022-016

This package should consist of:

•1 KVM Switch (B020-008, B020-008-17, B020-016, B020-016-17 or B022-016)

•1 USB Keyboard/Mouse Adapter

•1 Power Adapter with Power Cord

•Firmware Upgrade Cable

•1 Owner's Manual with Quick Start Guide

•1 Rackmount Kit (B022-016 only)

Check to see that the unit arrived undamaged, with all of its contents. Contact your dealer if there is a problem.

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234, www.tripplite.com

NOTE: Follow these instructions and operating procedures to ensure correct performance

and to prevent damage to this unit or to its connected devices.

Copyright © 2006 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

Image 1

Contents To prevent damage to this unit or to its connected devices This package should consistTable of Contents Overview Features IncludeComputer System RequirementsConsole for B022-016 only CablesIntroduction Front View of Console KVM SwitchPort LEDs Front View of B022-016Station ID LED Rear View for B022-016 Single-Station Installations InstallationMultiple Station Daisy-Chained Installation To set up a daisy-chained installationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationBasic Operation Manual Port SwitchingOpening the Console KVM Closing the Console KVMHot Plugging Powering Off and RestartingPort ID Numbering Invoking the Hotkey Mode Port Control Using HotkeysHotkeys Selecting the Active PortPausing in Auto Scan Setting the Scan IntervalStarting Auto Scan Hotkey Beeper Control Skip ModeHotkey Summary Table Port ID EnterOSD Overview OSD On-Screen Display OperationOSD Navigation OSD Functions OSD Main Screen HeadingsHeading Explanation F1 Go To GotoOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanTo prepare for the firmware upgrade, do the following Firmware Upgrade UtilityBefore You Begin To upgrade your firmware Starting the UpgradeUpgrade Failed Upgrade SucceededFirmware Upgrade Recovery Setting Default OSD Factory Default SettingsAppendix a Computer Connection TableSpecifications TroubleshootingSymptom Possible Cause Action Function B020-008 B020-016 B022-016Clear Log-in Information Appendix BAppendix D Appendix CFCC Radio/TV Interference Notice Appendix EAddendum