Setting up an IP Address, IP Installer

Setting up an IP Address

IP Address Determination

If you are an administrator logging in for the first time, you need to access the B051-000 in order to give it an IP address that users can connect to. There are three methods to choose from; IP Installer, Browser or AP Windows Client. In each case, the computer you are using to access the B051-000 must be on the same network segment as the unit. After you have connected and logged in you can give the B051-000 its fixed network address. The default username is administrator and the default password is password. It is strongly recommended that you change these upon accessing the B051-000.

IP Installer

For computers running Windows, an IP address can be assigned with the IP Installer utility:

1.Unzip the contents of IPInstaller.zip (found on the CD that came with the B051-000) and save them to a directory on your hard drive.

2.Go to the directory and run the IPInstaller.exe. A dialog box similar to the one below appears:

When the IP Installer main window comes up, the utility scans the network for B051-000 devices and lists the ones it finds in the Device List Panel. The Device List Panel consists of three columns, as shown in the following table:

Item	Description
Model Name	The device’s model name (B051-000).
MAC Address	The MAC address of the device.

IP Address	The current IP Address of the device.

3.Select the B051-000 from the Device List.

•If there is more than one B051-000, use the MAC address to find the unit that you want. The MAC address can be located on the bottom of the unit.

•If the list is empty, or the B051-000 does not appear, click

Enumerate to refresh the Device List.

Note: The Network Adapter drop-down list pertains to computers that have more than one network adapter installed. Users should select the network adapter that they want the Enumerate signal to be sent to.

4.Once you have selected the desired B051-000, you must choose whether you want to Obtain an IP address automatically (DHCP) or Specify an IP address. If you choose the latter, fill in the IP address, Subnet Mask, and Gateway fields with the information appropriate to your network.

5.Click Set IP.

6.Once the IP address shows up in the Device List, click Exit.

Browser

1.Set the IP address of the computer/server you are using to access the B051-000 to 192.168.0.XXX, where XXX represents any number or numbers except 10. (192.168.0.10 is the default IP address of the B051-000.)

2.Access the B051-000 by entering its default IP address (192.168.0.10) into your browser.