DIP Switch Settings
|
|
ONDIP
1 2 3 4 5 6 7 8
| ON |
| DIP | |
1 | 2 | 3 | 4 | 5 |
ON: Enables the corresponding PORT Alarm. If the port’s link fails, the relay will form an open circuit and the fault LED will light up.
Off: Disables the corresponding PORT Alarm. The relay will form a closed circuit and the Fault LED will never light up.
LED Indicators
The front panel of MOXA EtherDevice Switch contains several LED indicators. The function of each LED is described in the table below.
LED | Color | State | Description | |
P1 | AMBER | On | Power is being supplied to power input P1 | |
Off | Power is not being supplied to power input P1 | |||
|
| |||
|
|
|
| |
P2 | AMBER | On | Power is being supplied to power input P2 | |
|
| |||
Off | Power is not being supplied to power input P2 | |||
|
| |||
|
|
|
| |
|
| On | When the corresponding PORT alarm is | |
|
| enabled, and the port’s link is inactive. | ||
| RED |
| ||
Fault |
|
| ||
Off | When the corresponding PORT alarm is | |||
|
| |||
|
| enabled and the port’s link is active, or when the | ||
|
|
| corresponding PORT alarm is disabled. | |
|
|
|
| |
|
| On | TP port’s 10 Mbps link is active | |
10M | GREEN |
|
| |
Blinking | Data is being transmitted at 10 Mbps | |||
|
|
|
| |
|
| Off | TP Port’s 10 Mbps link is inactive | |
|
|
|
| |
|
| On | TP port’s 100 Mbps link is active | |
100M (TP) | GREEN |
|
| |
Blinking | Data is being transmitted at 100 Mbps | |||
|
|
|
| |
|
| Off | 100BaseTX Port’s link is inactive | |
|
|
|
| |
|
| On | FX port’s 100 Mbps is active | |
100M (FX) | GREEN |
|
| |
Blinking | Data is being transmitted at 100 Mbps | |||
|
|
|
| |
|
| Off | 100BaseFX port is inactive | |
|
|
|
|
— 12 —