Moxa Technologies EDS-305, EDS-308 manual DIN-Rail Mounting, Step

Page 6

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should already be fixed to the back panel of EDS when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to EDS, make sure the stiff metal spring is situated towards the top, as shown in the figures below.

STEP 1:

STEP 2:

Insert the top of the DIN-Rail into the slot just below the stiff metal spring.

The DIN-Rail attachment unit will snap into place as shown below.

	metal	metal
	spring
		spring

DIN-Rail

DIN-Rail

To remove MOXA EtherDevice Switch from the DIN-Rail, simply reverse Steps 1 and 2 above.

— 5 —

Image 6

Contents EDS-308/305 Hardware Installation Guide Package Checklist FeaturesOverview Panel Layout of EDS-305 Series Rear Panel ViewPanel Layout of EDS-308 Series Mounting Dimensions unit = mm DIN-Rail Mounting StepWall Mounting Optional StepWiring Requirements Safety FirstGrounding Moxa EtherDevice Switch Wiring the Alarm ContactWiring the Redundant Power Inputs Top View Front ViewCommunication Connections 10/100BaseTX Ethernet Port ConnectionRedundant Power Inputs Alarm ContactDIP Switch Settings LED IndicatorsSwitching and Address Learning Dual Speed Functionality and SwitchingSwitching, Filtering, and Forwarding Auto MDI/MDI-X ConnectionSpecifications Auto-Negotiation and Speed SensingWarranty Moxa Internet Services Revision History