Moxa Technologies EDS-208-M-ST, EDS-208-M-SC DIN-Rail Mounting, Mounting Dimensions unit = mm

Mounting Dimensions (unit = mm)

	74
32	15
	10.5

	15.6
	23
100	12

86.5

	15
	7
	P
7	8
76	6	100
5
.2
3	4
	100
1	2
	10
	40.03
EDS-208

	P
100M
Rx
7	8
Tx
5	6
3	4
	100
1	2
	10

EDS-208-M-SC/ST

40.03

V-	74
V+
24 VDC/VAC

Side View

Front View Rear View Top View

DIN-Rail Mounting

The plastic DIN-Rail attachment plate should already be fixed to the rear panel of EDS-208 when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to EDS-208, make sure the DIN-Rail kit is situated towards the top, as shown in the figures below.

STEP 1:	STEP 2:
Insert the top of the DIN-Rail into	The DIN-Rail attachment unit will
the slot.	snap into place as shown below.

DIN-Rail

DIN-Rail

To remove Moxa EDS-208 from the DIN-Rail, insert a flat-blade screw driver horizontally into the DIN-Rail kit under the EDS-208, and then pull it upwards and release EDS-208 towards you away from the DIN-Rail.

DIN-Rail

- 5 -