MGate EIP3000 Series User’s Manual | Configuring the EtherNet/IP Gateway |
ATTENTION
To erase an existing password, leave both the New Password and Confirm Password text input boxes blank. The password will be erased when you click OK in the bottom right corner.
Configure Serial Communication Parameters
The Serial tab is where each serial port’s communication parameters are configured. You can configure Baud Rate, Parity, Stop Bit, Flow Control, FIFO, and Interface Mode.
Parameter | Value | |
Interface Mode | ||
| ||
Baud Rate | 1200 bps to 961200 bps | |
Parity | None, Odd, Even | |
Stop Bits | 1, 2 | |
Flow Control | None, DTR/DSR, RTS/CTS | |
UART FIFO | Enable, Disable |