Atlas Sound specifications PA601 Commercial Amplifier Wiring the PA601, Security Cover Option

PA601 COMMERCIAL AMPLIFIER

WIRING THE PA601

OWNER'S MANUAL

Speaker Outputs - Use 2 conductor unshielded wire of the appropriate gauge. If you are unsure about this, contact Atlas Sound Tech Support at 1-800-876-3333. Make sure you know how many speakers you need and what tap value you intend to use.

Balanced Input - Use 2 conductor w/shield for low level signals (20-22 gauge is best). Maintain the proper polarity, + to +, – to –, and shield to ground.

Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from vendors to simplify interconnection to external devices.

SECURITY COVER OPTION

In order to prevent unauthorized operation of the PA601, optional security covers are available which take the place of the front panel knob. After the PA601 has been installed and is operating as desired, grasp the front panel knob and pull straight out from the front panel. Replace the knob with a security cover, Atlas part number AAVCC-5.

F7,&'7 fb_\_[h

Signal Peak Power

Power

On

Off



Master

or

Front Panel

Knob

Security Cover

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •			TELEPHONE: (800) 876-3333 •	FAX: (800) 765-3435
©2006 ATLAS SOUND LP	Printed in U.S.A.	00106	ATS002264 RevA 01/06	PP
				9