2.Lift the handle on the front panel and pull the front panel door out from the body (as shown below).
3.Place the hard drive into the SAT3510BU2E, SAT3510BUEGB, SAT3510BUEEU.
The printed label on the hard drive should be on the right hand side, with the SATA connector on the lower half of the drive.
4.Push the door to slide the hard drive into place. Do not push the hard drive into the
enclosure by hand, otherwise it may not be properly installed.
5. Turn the key lock into lock position to complete the physical installation.
Instruction Manual
3