Specifications

DESIGNATION TYPE	PR 200
OUTPUT POWER	Stereo Continuous sine wave output power,
	both channels driven +/- 1dB, 20 Hz to 20kHz, THD < 0.03%
	150 W into 8		Ω	, each channel
	300 W into 4		Ω	, each channel
MONO BRIDGE	300 W into 16 Ω
	600 W into 8		Ω
SINGLE CHANNEL DRIVEN @ 1 kHz, 1% THD	8 Ω	179W
	4 Ω	312W
POWER BANDWIDTH	10 Hz to 68 kHz
	(3 dB down from rated power at less than 0.1% THD)
FREQUENCY RESPONSE	+0 -3dB; 5 Hz to 68 kHz (at rated power, 8 Ω )
RISE TIME	Less than 5.2 µSec
SLEW RATE	Greater than 13.5 V/µSec
TOTAL HARMONIC	20 to 20 kHz at rated power, 4 Ω . Less than 0.03%
DISTORTION (THD)
HUM AND NOISE	Below rated output, 4 Ω
	20 Hz to 20 kHz broad band 95 dB
	IEC A Weight 102 dB
DAMPING FACTOR	Reference, 8 Ω
	5 Hz to 20 kHz Greater than 30
	1 kHz Greater than 175
INPUT IMPEDANCE	Differential 33 kΩ
CHANNEL SEPARATION	Below rated power, single channel operating
	1 kHz, Greater than 65 dB
SENSITIVITY	Referenced 1 kHz, +/- 0.25 dB
	Stereo Mode +1.8 dBV (1.23V)
	Bridged Mode +1.8 dBV
STATUS INDICATORS	Each channel-Peak LED (red)
	Power LED (green)
COOLING	Two speed fan
GAIN CONTROLS	Continuously variable attenuator, one per channel
MODE SWITCHING	Stereo-Mono Bridge, Stereo-Dual Mono, two push button
	switches
POWER REQUIREMENTS	1000W
DIMENSIONS

THIS EQUIPMENT CONFORMS TO THE FOLLOWING DIRECTIVES :

EMC 89/336/EEC AND LV 73/23/EEC

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORP.

CORONA, CA 91720 USA

SPECIFICATIONS