StarTech.com USB300WN2X2D manual Installation, Windows XP/Server

Installation

Windows XP/Server 2003

1.Upon starting Windows, before connecting the USB adapter, insert the included Driver CD into the computer’s CD/DVD drive.

2.AutoPlay should automatically launch the Driver/Software installation splash screen. If not, open “My Computer” then open the CD/DVD drive the Driver CD is inserted into and double-click the file Setup.exe.

3.Select the option to install the Drivers. This will launch the Driver Installation wizard.

4.During the installation, you will be prompted to install only the drivers or also the Ralink WLAN Utility. If you wish to use the built-in Windows utility for setting up your wireless connection, then install the drivers only. If you do not wish to use the built-in Windows Utility (Zero Configuration Utility), then also install the Ralink Utility. NOTE: You can switch to using the Windows Utility at any time.

5.Complete the wizard and this will automatically install all of the drivers/software.

6.Connect the USB adapter to an available USB port. Windows will automatically install the drivers.

NOTE: The USB cable has two connectors (Primary, Secondary). Only the Primary connector must be connected. If the USB port is unable to provide enough power for the adapter, then the Secondary connector can also be plugged in for supplementary power.

Instruction Manual

3