StarTech.com SV431DVIUAHR Installation, PC BIOS Notice, Console Connection, Instruction Manual

Page 6

Instruction Manual

Installation

PC BIOS Notice

The following BIOS setup changes may be necessary for PC users.

1.In STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD

2.In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set USB IRQ to ENABLED.

Please Note: The SV431DVIUAHR provides USB keyboard and mouse switching from one computer to the other. If you plan to share other pe- ripherals, such as a CCD camera, printer or scanner, it is required to shut down the computer driver before switching to another computer.

Console Connection

Before installation, ensure that all devices and computers to be connect- ed to the SV431DVIUAHR are powered off.

1.Connect a DVI-capable monitor to the Console’s DVI port.

2.Plug a USB keyboard and a USB mouse to any two of the Console’s USB ports as shown below.

USB Device

USB Mouse

USB Keyboard

Image 6

Contents Switch with Audio SV431DVIUAHR4 Port Dual Link DVI USB KVM Increase the separation between the equipment and receiver FCC Compliance StatementReorient or relocate the receiving antenna Consult the dealer or an experienced radio/TV technician for helpTroubleshooting Instruction ManualTable of Contents Warranty InformationFeatures Package ContentsIntroduction System Requirements Console SideComputer Side Installation PC BIOS NoticeConsole Connection Front Panel OperationComputer Connection One USB patch cable for both keyboard and mouseAuto Scan Scan Time“FUNC” Button StepStep USB or monitor cables to the switchRack Mount Kit for SV431DVIUAHR Optional Two screws secureSpecifications SpecificationSV431DVIUAHR Solution TroubleshootingSymptom CausesInstruction Manual Warranty Information Technical SupportLimitation of Liability