7
generated and the bad key sequence will not be forwarded to the selected computer.
To select a computer: left Ctrl + left Ctrl + 1 Selects the computer at port 1. Left Ctrl + left Ctrl + 2 Selects the computer at port 2.
NOTE: Do not use the keypad at the right of the keyboard.
To start Auto Scan, automatically scan
To abort the Auto Scan mode, press the left Ctrl key twice. When Auto Scan detects any keyboard or mouse activity, it suspends the scanning until activity stops; it then resumes with the next computer in sequence. The length of the Auto Scan interval (Scan Rate) is adjustable, see below.
Manual Scan enables you to manually switch back and forth between
left Ctrl + left Ctrl + F2.
Press or to select the previous or the next computer in sequence. And, press any other key to abort the Manual Scan.
To adjust Scan Rate which sets the duration before switching to the next computer in Auto Scan:
left Ctrl + left Ctrl + F3.
The StarView generates 1 to 4 beeps indicating scan interval of 3, 8, 15 and 30 seconds respectively.