Instruction Manual
Operation
There are two ways to select the host computer you wish to broadcast to the console: the Remote Selector, and Hotkey Mode. If you wish to use the Remote Selector to switch between host computers, simply connect it to the Remote Selector Input (shown on pg.3). To switch between host computers, press the button on the remote selector, pictured below.
Port Selection Button
Hotkey Configuration
Invoking Hotkey Mode
All Hotkey operations begin by tapping the Scroll Lock key twice. The tables on the following page describe the action that each hotkey opera- tion performs.
Please Note: The default hotkey invocation key is the Scroll Lock key, but the Ctrl key can also be used.
5