StarTech.com SV841HDI, SV1641HDI, SV441HDI SVx41HDI Series Server Remote Control Instruction Guide

SVx41HDI Series Server Remote Control: Instruction Guide

Remote Control, you can use any typical communication software package (UNIX: tip, cu,

kermit, minicom; Windows: HyperTerminal, kermit).

Using the DB9 female-to-female null-modem serial cable (provided) connect one end of the cable to the SERIAL port on the rear panel of the SVx41HDI. Connect the opposite end to the serial port on the computer you are using to configure the unit. Configure the terminal software with “8N1” settings:

Connection speed: 115200 bps

No. of bits: 8

Parity: None

Stop bits: 1

Flow Control: None

5