Moxa Technologies UC-7420/7410 user manual Enabling and Disabling Daemons

UC-7420/7410 User’s Manual Managing Embedded Linux

Back up the user file system to a PC (refer to the previous subsection, “Backing Up the User File System,” for instructions), and then type the following commands to copy the backup to additional UC-7420/7410 units.

#upramdisk

#cd /mnt/ramdisk #upfirm usrfs-backup

192.168.3.127 – PuTTY

root@Moxa:/mnt/ramdisk# ls -al

drwxr—xr-x	3	root	root	1024 Jun 15 02:47
drwxr—xr-x 15 root			root	0 Sep 29	2004
-rw-------	1	root	root	12288 Jun 15 02:45 lost+found
-rw-r--r--	1	root	root	27263140 Jun	15 02:48 usrfs-backup

root@Moxa:/mnt/ramdisk# upfirm usrfs-backup Upgrade firmware utility version 1.1.

To check source firmware file context. The source firmware file conext is OK. This step will destroy all your firmware. Do you want to continue it ? (Y/N) :

Now upgrade the file [user-file-systim]:

Do you want to keep the network IP setting on /etc/network/interfaces file ? (Y/ N) :

Backup the network setting

Format MTD device [/dev/mtd3] . . .

Wait to write file . . .

Compleleted 100%

Now update the configuration file. Upgrade the firmware is OK.

Please press any key to reboot system.

NOTE The differences between updating the User File System for firmware versions before and after firmware V1.5 are:

1.Before (but not including) V1.5, the user must jump to the Mini File System and use the #bf command.

2.For V1.5 (and later versions), the user can use #upfirm command.

Enabling and Disabling Daemons

The following daemons are enabled when UC-7420/7410 boots up for the first time.

snmpd	SNMP Agent daemon
telnetd	Telnet Server / Client daemon
inetd	Internet Daemons
ftpd	FTP Server / Client daemon
sshd	Secure Shell Server daemon
httpd	Apache WWW Server daemon
nfsd	Network File System Server daemon

Type the command “ps –ef” to list all processes currently running.

3-6